5MT-47
Reverse Check Sleeve
MANUAL TRANSMISSION AND DIFFERENTIAL
E: INSPECTION
• Make sure the cutout of the reverse accent shaft
is aligned with the opening in the reverse check
sleeve.
• Turn the cam by hand to check for smooth rota-
tion.
• Move the cam and shaft all the way toward the
plate, and make sure it releases.
If the cam does not return properly, replace the re-
verse check spring. If the shaft does not return,
check for scratches on the inner surface of sleeve.
If the sleeve is in good order, replace the spring.
• Select a suitable reverse accent shaft and re-
verse check plate. <Ref. to 5MT-47, ADJUST-
MENT, Reverse Check Sleeve.>
F: ADJUSTMENT
1. NEUTRAL POSITION ADJUSTMENT
1) Shift the gear into 3rd gear position.
2) Because of the return spring, until the arm con-
tacts the stopper the shifter arm will feel lighter
moving towards 1st/2nd gear and heavier towards
the reverse gear.
3) Make adjustment so that the heavy stroke (re-
verse side) is a little heavier than the lighter stroke
(1st/2nd side).
4) To adjust, remove the bolts holding the reverse
check sleeve assembly to the case, and move the
sleeve assembly outward, then place an adjust-
ment shim between the sleeve assembly and the
case to adjust the clearance.
CAUTION:
Be careful not to damage the O-ring when plac-
ing shims.
NOTE:
• When the shim is removed, the neutral position
will move closer to reverse; when the shim is add-
ed, the neutral position will move closer to 1st gear.
• If it is not possible to adjust the clearance with
only shims, replace the reverse accent shaft and
re-adjust.
(A) Snap ring
(B) Reverse check plate
(C) Reverse check spring
(D) Reverse check cam
MT-00156
(A)
(D)
(B)
(C)
Adjusting shim
Part number
Thickness mm (in)
32190AA000
0.15 (0.0059)
32190AA010
0.30 (0.0118)
Reverse accent shaft
Part number
Mark
Remarks
32188AA130
S
Neutral position is closer to
1st gear.
32188AA140
T
Standard
32188AA150
U
Neutral position is closer to
reverse gear.
Summary of Contents for 2009 IMPREZA
