Subaru 2009 IMPREZA, Service Manual

Page: 2620 / 3619

PB-6
Parking Brake Assembly (Rear Disc Brake)
PARKING BRAKE
4. Parking Brake Assembly
(Rear Disc Brake)
A: REMOVAL
1) Release the parking brake.
2) Lift up the vehicle, and then remove the rear
wheels.
3) Remove the brake hose bracket.
4) Remove the two mounting bolts and remove the
rear disc brake caliper.
5) Suspend the rear disc brake caliper so that the
brake hose is not stretched.
6) Remove the rear disc brake rotor.
NOTE:
If the disc rotor is difficult to remove, try the follow-
ing two methods in order.
(1) Turn the adjusting screw using a flat tip
screwdriver until the brake shoe moves ade-
quately away from the disc rotor.
(2) If disc rotor is seized on the hub, drive the
disc rotor out by pushing two 8 mm bolts in
holes B on the rotor.
7) Remove the shoe return spring.
8) Remove the brake shoe cup and brake shoe
spring, and remove the primary brake shoe.
9) Remove the strut and strut spring.
10) Remove the adjuster.
11) Remove brake shoe cup and brake shoe
spring, and remove the secondary brake shoe.
(1) Adjuster
(2) Flat tip screwdriver
(3) Disc rotor
RS-00264
BR-00663
(1)
(3)
(2)
BR-00734
(1) Brake shoe cup
(2) Primary brake shoe
A
B
BR-00036
PB-00129
(1)
(2)
PB-00096