Subaru 2009 IMPREZA, Service Manual

Page: 3103 / 3619

SE-12
Rear Seat
SEATS
7) Remove the backrest from the hinge assembly
LH (hinge assembly RH).
NOTE:
The armrests cannot be detached while pin posi-
tions of the hinge assembly and armrest are not
aligned.
B: INSTALLATION
CAUTION:
If the hooks on the vehicle body side disengage
(remained on the seat cushion side), when the
rear seat cushion is removed, always replace
with new hooks.
Install in the reverse order of removal.
Tightening torque:
Refer to “COMPONENT” of “General Descrip-
tion”. <Ref. to SE-4, REAR SEAT, COMPO-
NENT, General Description.>
C: DISASSEMBLY
1) Remove the rear seat. <Ref. to SE-11, REMOV-
AL, Rear Seat.>
2) Remove the armrest hinge cover in the direction
of arrow (black), and loosen the screws to remove
the armrest.
NOTE:
The armrests cannot be detached while the back-
rest assembly RH and armrest side pin positions
are not aligned.
3) Remove the backrest knob. (Screw-in type)
(5 door model)
SE-00348
SE-00937
SE-00776
SE-00777
SE-00778