Subaru 2009 IMPREZA, Service Manual

Page: 1258 / 3619

EN(H4DOTC)(diag)-37
Subaru Select Monitor
ENGINE (DIAGNOSTICS)
NOTE:
For detailed operation procedures, refer to “PC application help for Subaru Select Monitor”.
Purge control solenoid valve 2 signal CPC Solenoid 2 — OFF (when OFF)
AT coordinate retard angle demand signal Retard Signal from AT — OFF
AT coordinate fuel cut demand signal Fuel Cut signal from AT — OFF
Vehicle dynamics control (VDC) torque down prohibition
output
Ban of Torque Down — ON
Vehicle dynamics control (VDC) torque down demand
Request Torque Down
VDC
— OFF
AT coordinate permission signal Torque permission signal — ON/OFF
ETC motor relay signal ETC Motor Relay — ON
Clutch switch signal Clutch Switch — OFF (when OFF)
Stop light switch signal Stop Light Switch — OFF (when OFF)
SET/COAST switch signal SET/COAST Switch — OFF (when OFF)
RES/ACC switch signal RESUME/ACCEL Switch — OFF (when OFF)
Brake switch signal Brake Switch — OFF (when OFF)
Main switch signal Main Switch — OFF (when OFF)
Body integrated unit data reception Body Int. Unit Data — ON
Body integrated unit counter update Body Int. Unit Count — ON
Secondary air combination valve relay 2 signal Sec. Air Combi V Relay 2 — OFF (when OFF)
Secondary air pump relay signal
Secondary Air Pump
Relay
— OFF (when OFF)
Secondary air combination valve relay 1 signal Sec. Air Combi V Relay 1 — OFF (when OFF)
Cruise control cancel switch signal CC Cancel SW — OFF (when OFF)
Malfunction indicator light signal MIL On Flag — OFF (when unlit)
Contents Display
Unit of
measure
Note (at idling)