Subaru 2009 IMPREZA, Service Manual

Page: 3360 / 3619

LAN(diag)-27
Subaru Select Monitor
LAN SYSTEM (DIAGNOSTICS)
5) After setting, make sure that the setting changed in the {Current Data Display & Save} is same as vehicle
equipment.
CAUTION:
• The above settings must match the actual vehicle equipment.
• Do not change settings except for setting above while setting the functions.
• Be sure not to change Factory or Market setting except when installing a new body integrated unit.
NOTE:
For details concerning the operation procedure, refer to “PC application help for Subaru Select Monitor”.
10.FUNCTION CHECK
In order to check the body integrated unit function,
inspect the body integrated unit and actuator using
Subaru Select Monitor without operating switches.
1) On «Main Menu» display, select {Each System
Check}.
2) On «System Selection Menu» display, select {In-
teg. unit mode}.
3) On «Integ. unit mode failure diag» display, select
{Function check}.
4) Select the item to be operated on the «Function
check» display screen with “UP/Down key” and
press the [Next] button.
5) Pressing [Next] starts, [End] cancels the opera-
tion and [OK] returns to the System Operation
Check Mode display screen.
NOTE:
If not equipped (based on area or condition), pro-
cess will not go on.
Initial button setting —
— —
Execution
Settings of each function are initialized. (No. 1: Normal, No.
3: 15 min., No. 4: 15 min., No. 8: ON)
Passive Alarm OFF
ON
Setting only for North American models
OFF
Door open warning ON
ON
If detecting door open for 30 minutes, room light, and key
ring illumination that are related to doors are turned off to
prevent battery run-out.
OFF
Room light, key illumination and door warning light is not
turned off.
Dome Light Alarm Setting OFF
ON
The room light lights by being interlocked with the activation
of the alarm.
OFF
Map Light Setting ON
ON Illuminates in accordance with the door interlocked room
light. (model with sunroof)
OFF
Belt Warning Switch ON
ON When using normally
OFF
Stop the belt warning buzzer beep and warning light illumi-
nation.
Data
Initial set-
ting value
Customize setting Remarks
LAN00018
HEATER COCK VALVE OUTPUT
DOOR LOCK ACTUATOR LOCK OUTPUT
ALL SEAT UNLOCK OUTPUT
HORN OUTPUT
R GATE/TRUNK UNLK OUTPUT
DOUBLE LOCK OUTPUT
SHIFT LOCK SOLENOID
KEY LOCK OUTPUT
FUNCTION CHECK