Subaru 2009 IMPREZA, Service Manual

Page: 3357 / 3619

LAN(diag)-24
Subaru Select Monitor
LAN SYSTEM (DIAGNOSTICS)
• List of body integrated unit registration item
NOTE:
Setting is different depending on the grade of vehicle.
CAUTION:
• To perform normal operation of vehicle and diagnosis, above settings must match the actual ve-
hicle equipment.
• When body integrated unit is a new part or “Factory” mode, key illumination blinks to show
equipment settings have not been completed. Check the detailed procedures of function setting.
• Be sure not to change Factory or Market setting except when installing a new body integrated
unit.
NOTE:
“Factory” mode:
• Body integrated unit has not been set yet. It can be recognized by key illumination blinking with ignition
switch turned to ON.
• All replacement body integrated units are set to “Factory” mode. When replacing a body integrated unit,
be sure to perform the registration operation.
“Market” mode:
• Each settings have been set. It can be recognized by key ring illumination coming on in concocting with
room light and going off with ignition switch turned to ON.
Data
Initial set-
ting
Registration Remarks
A/C ECM setting OFF
ON
Set to “ON” in case of model with auto A/C. Set to
“OFF” in case of model without auto A/C.
OFF
wiperdeicer (Manufacturer
option)
OFF
ON Be sure to set exactly according to vehicle equipment.
ON signal does not output even when the switch is
operated, if “OFF” is set.
OFF
Sedan/Wagon Setting Wagon
Sedan
Be sure to set exactly according to vehicle model. This
relates to door lock control.
Wagon
MT/AT Setting AT
MT
Be sure to set exactly according to vehicle model. This
relates to key interlock control, shift lock control.
AT
6MT Setting
Other than
6MT
6MT
Set “6MT” for 6MT model, and set “Other than 6MT” for
AT/5AT model.
Other than 6MT
Factory or Market setting Factory
Factory Be sure to set to “Market”. After setting change, turn
the ignition switch to OFF and settle the changed set-
tings.
Market