Subaru 2009 IMPREZA, Service Manual

Page: 2594 / 3619

BR-27
Rear Drum Brake Shoe
BRAKE
9. Rear Drum Brake Shoe
A: REMOVAL
1) Remove the rear drum brake drum. <Ref. to BR-
26, REMOVAL, Rear Drum Brake Drum.>
2) Remove the shoe hold-down spring.
3) Remove upper shoe return spring, lower shoe
return spring and adjuster, then remove the leading
shoe.
4) Remove the shoe hold-down spring and trailing
shoe.
5) Disconnect the parking brake cable from the
parking brake lever.
B: INSTALLATION
CAUTION:
Be sure the lining surface is free from brake flu-
id and grease.
1) Apply brake grease to the following locations.
Brake grease:
Molykote M7439 (Part No. K0770YA000)
• Six contact surfaces of the brake shoe rim and
back plate
• Contact surface of the brake shoe and the wheel
cylinder
• Contact surface of the brake shoe and the ad-
juster
• Contact surface of lever and brake shoe
2) Connect the parking brake cable to the parking
brake lever.
3) Check that the parking brake cable is not coming
off from the cable guide.
4) Install the trailing shoe and hold it down with the
shoe hold-down spring.
5) Install the adjuster and adjusting lever to the
leading shoe.
NOTE:
Install the adjuster with the adjusting wheel facing
toward the front side of vehicle.
6) Install the leading shoe and hold it down with the
shoe hold-down spring.
7) Install the adjusting spring and return spring.
8) Install the rear brake drum. <Ref. to BR-26, IN-
STALLATION, Rear Drum Brake Drum.>
(1) Shoe hold-down spring
(1) Parking brake cable
(2) Trailing shoe
(3) Parking brake lever
(1)
BR-00664
BR-00665
(2)
(3)
(1)
BR-00666
(1) Front side of vehicle
(2) Adjusting wheel
BR-00667
(2)
(1)
BR-00668