Subaru 2009 IMPREZA, Service Manual

Page: 3052 / 3619

GW-18
Rear Door Glass
GLASS/WINDOWS/MIRRORS
11.Rear Door Glass
A: REMOVAL
1) Remove the rear door trim. <Ref. to EI-43, RE-
MOVAL, Door Trim.>
2) Remove the sealing cover. <Ref. to EB-25, RE-
MOVAL, Rear Sealing Cover.>
3) Operate the power window switch to move the
glass, and remove the two bolts.
4) Remove the glass from the carrier plate, and
while holding the glass, lower the carrier plate
alone to the lowest position.
CAUTION:
Without the carrier plate lowered to the bottom
most position, do not lower the glass by itself
to the lowest position within the door panel.
The glass may come off of the sash, and be-
come damaged.
5) Lower the glass slowly to the bottom most posi-
tion in the door panel.
6) Remove the bolts and nuts, and then remove the
sash. (Detach starting from the upper holding
points.)
7) Remove the glass run rubber.
8) Remove the door glass while tilting.
CAUTION:
Avoid impact and damage to the glass.
B: INSTALLATION
CAUTION:
Make sure that the glass run rubber is placed
securely in door frame and sash.
Install in the reverse order of removal.
Tightening torque:
Refer to “COMPONENT” of “General Descrip-
tion”. <Ref. to GW-5, REAR DOOR GLASS,
COMPONENT, General Description.>
GW-00654
GW-00655