Subaru 2009 IMPREZA, Service Manual

Page: 1004 / 3619

FU(H4DOTC)-79
Fuel Filter
FUEL INJECTION (FUEL SYSTEMS)
8) Lift the two tab holders connecting the pump as-
sembly to the fuel filter using a flat tip screwdriver
(with a shaft diameter of approx. 3 mm (0.12 in)),
etc., and separate the fuel filter and pump assem-
bly.
CAUTION:
• To prevent damaging the tabs of the pump
assembly, wrap the tip of flat tip screwdriver
(A), etc. with tape (B).
• Be careful not to drop or apply any impact to
the pump assembly.
NOTE:
If the spacer and O-ring is remaining on the pump
assembly, remove these.
B: INSTALLATION
1) Assemble O-ring (A) and spacer (B) to the pump
assembly and attach the pump assembly to the fuel
filter.
NOTE:
• Use new O-rings (8 mm (0.31 in) inner diameter).
• Use a new spacer.
• Apply gasoline to the O-ring.
• Insert the pump assembly until a click is heard.
2) Connect the connector to the pump assembly.
FU-03929
(B)
(A)
FU-03927
(A)
(B)
FU-03859
FU-03853