Subaru 2009 IMPREZA, Service Manual

Page: 3058 / 3619

GW-24
Windshield Glass
GLASS/WINDOWS/MIRRORS
11) Fit the locating pins to vehicle body using suc-
tion rubber cup to install the windshield glass.
12) Lightly press the windshield glass for tight fit.
13) Make flush the adhesive surface jutted out us-
ing spatula.
14) After completion of all work, allow the vehicle to
stand for about 24 hours.
NOTE:
• When door is opened/closed after glass is bond-
ed, always lower the door glass first, and then
open/close it carefully.
• Move the vehicle slowly.
• For minimum drying time and vehicle standing
time before driving after bonding, follow instruc-
tions or instruction manual from the adhesive man-
ufacturer.
15) After curing of adhesive, pour the water on ex-
ternal surface of vehicle to check that there are no
water leaks.
NOTE:
When a vehicle is returned to the user, tell him or
her that the vehicle should not be subjected to
heavy impact for at least three days.
16) Install the cowl panel. <Ref. to EI-38, INSTAL-
LATION, Cowl Panel.>
17) Connect the wiper deicer connector. (Model
with wiper deicer)
18) Install the front pillar upper trim. <Ref. to EI-57,
INSTALLATION, Upper Inner Trim.>
A Upper end
B Lower end
C Side end
(1) Glass
(2) Molding
(3) Adhesive
(4) Dam rubber
(5) Cowl panel
9 mm
(0.35 in)
2 mm
(0.08 in)
(4)
(2)
8 mm
(0.31 in)
B
A
C
(3)
(1)
7 mm
(0.28 in)
9 mm
(0.35 in)
2 mm (0.08 in)
8 mm (0.31 in)
23.5 mm
(0.93 in)
(4) (5) (3) (1)
(4)
(2)
(3)
(1)
9 mm
(0.35 in)
2 mm
(0.08 in)
8 mm
(0.31 in)
7 mm
(0.28 in)
GW-00732
GW-00045