Subaru 2009 IMPREZA, Service Manual

Page: 91 / 3619

PM-27
Transmission Gear Oil
PERIODIC MAINTENANCE SERVICES
14.Transmission Gear Oil
A: REPLACEMENT
1. MANUAL TRANSMISSION
1) Drain the gear oil by removing drain plug.
CAUTION:
If transmission gear oil is spilt over the exhaust
pipe, wipe it off with a cloth to avoid emitting
smoke or causing a fire.
NOTE:
• Before starting work, cool off the transmission
gear oil well.
• Drain the gear oil by removing drain plug using
TORX
®
bit T70.
2) Replace the gasket with new part, and then tight-
en the drain plug to specified torque.
Tightening torque:
44 N·m (4.5 kgf-m, 32.5 ft-lb) (Aluminum gas-
ket silver)
70 N·m (7.1 kgf-m, 51.6 ft-lb) (Copper gasket
brown)
70 N·m (7.1 kgf-m, 51.6 ft-lb) (Metal gasket
black)
3) Fill the transmission gear oil through the oil level
gauge hole up to the upper point of level gauge.
Recommended gear oil:
Refer to “RM” section. <Ref. to RM-2, LUBRI-
CANTS, RECOMMENDED MATERIALS, Rec-
ommended Materials.>
NOTE:
Each oil manufacturer has its base oil and addi-
tives. Thus, do not mix two or more brands.
Gear oil capacity:
Refer to “SPC” section. <Ref. to SPC-4, CA-
PACITY, Impreza.>
MT-01548
(A) Oil level gauge
(B) Upper level
(C) Lower level
PM-00030
(B)
(C)
(A)