Subaru 2009 IMPREZA, Service Manual

Page: 1908 / 3619

4AT-52
Front Vehicle Speed Sensor
AUTOMATIC TRANSMISSION
20) Remove the front vehicle speed sensor and
torque converter turbine speed sensor.
21) Disconnect the connector from the rear vehicle
speed sensor.
22) Remove the oil pan.
CAUTION:
Be careful not to allow foreign matter such as
dust or dirt to enter the oil pan.
23) Disconnect the control valve connector and
transmission ground terminal.
24) Remove the transmission harness assembly.
B: INSTALLATION
1) Pass the transmission harness assembly
through the hole of the transmission case.
2) Connect the control valve connector and trans-
mission ground.
Tightening torque:
8 N·m (0.8 kgf-m, 5.9 ft-lb)
3) Apply proper amount of liquid gasket to the en-
tire oil pan mating surface.
Liquid gasket:
THREE BOND 1217B (Part No. K0877YA020)
or equivalent
(A) Front vehicle speed sensor
(B) Torque converter turbine speed sensor
(A) Rear vehicle speed sensor
(A) Transmission ground terminal
(B) Control valve connector
AT-00044
( A )
( B )
AT-02207
(A)
(A)
(B)
AT-04832
(A) Transmission ground terminal
(B) Control valve connector
AT-00048
(A)
(B)
AT-04832
AT-02742