Subaru 2009 IMPREZA, Service Manual

Page: 3351 / 3619

LAN(diag)-18
Subaru Select Monitor
LAN SYSTEM (DIAGNOSTICS)
lock actuat. LOCK output ON/OFF
Body integrated unit
output value
ON when LOCK signal is output
All seat UNLOCK output ON/OFF
Body integrated unit
output value
ON when unlock signal is output
D-seat UNLOCK output ON/OFF
Body integrated unit
output value
ON when unlock signal is output
R gate/trunk UNLK output ON/OFF
Body integrated unit
output value
ON when rear gate/trunk unlock signal is
output
R wiper output ON/OFF
Body integrated unit
output value
ON when rear wiper motor is operating
Shift Lock Solenoid ON/OFF
Body integrated unit
output value
ON when shift lock solenoid is operating
(only AT)
Key locking output ON/OFF
Body integrated unit
output value
With ignition switch ON and in other than
the shift P range, with key in switch ON
wiper deicer output ON/OFF
Body integrated unit
output value
ON when wiper deicer relay is operating
Hazard Output ON/OFF
Body integrated unit
output value
ON when answer-back signal is received or
when hazard is operating
Keyless Buzzer Output ON/OFF
Body integrated unit
output value
ON when lock/unlock signal is received
Horn Output ON/OFF
Body integrated unit
output value
ON when security warning is operating
D-belt warning light O/P ON/OFF CAN data output value
ON when ignition switch is turned to ON,
and buckle switch is turned off
P-belt warning light O/P ON/OFF
Body integrated unit
output value
ON when ignition switch is turned to ON,
occupant is seated, and buckle switch is
turned OFF
Illumination lamp O/P ON/OFF
Body integrated unit
output value
ON when illumination is illuminated
Room lamp output ON/OFF
Body integrated unit
output value
ON when keyless lock/unlock signal is
received (when keyless switch connector is
removed)
key illumi. lamp o/p ON/OFF
Body integrated unit
output value
ON when key illumination light is illuminated
Immobilizer lamp output ON/OFF
Body integrated unit
output value
ON when immobilizer pilot light blinks
Keyless operation 1 Regist./Normal
Body integrated unit input
value
When keyless is registered
Keyless operation 2 Deletion/Normal
Body integrated unit input
value
When keyless registration is deleted
CC Main Lamp ON/OFF CAN data input value
Cruise control switch ON
Reception from ECM and transmission to
combination meter
CC Set Lamp ON/OFF CAN data input value
ON when cruise control vehicle speed is
set
Reception from ECM and transmission to
combination meter
SPORT Lamp ON/OFF CAN data input value
SPORT mode switch ON
Reception from TCM and transmission to
combination meter
(only AT)
SPORT Blink Blink/OFF CAN data input value
Blinks when there is an AT failure
Reception from TCM and transmission to
combination meter
(only AT)
Items to be displayed Unit of measure Remarks Note