Sharp MX-B382 Operation Manual Download Page 676

Page: 676 / 830

7-13

SYSTEM SETTINGS

Contents

List Print (User)

Lists showing the settings and information stored in the machine can be printed. Touch the [List Print (User)] key and
select the settings.

List name

Description

All Custom Setting List

This list shows the hardware status, software status, printer condition settings, paper
tray settings, and total counts.

Printer Test Page

This is used to print the PCL Symbol Set List, various font lists, and the NIC page
(network interface settings, etc.).

• PCL Symbol Set List
• PCL Internal Font List
• PCL Extended Font List
• PS Font List
• PS Extended Font List
• NIC Page

Sending Address List

Lists can be printed of various addresses stored in the machine.

• Individual List
• Group List
• Program List
• Memory Box List
• All Sending Address List

Document Filing Folder List

This shows the folder names for document filing.

• The items that appear will vary depending on the functions that have been added to the machine.

• If "

Prohibit Test Page Printing

" (page 7-76) has been enabled in the system settings (administrator), it will not be possible

to print a test page.

Summary of Contents for MX-B382































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-B382

Reviews:

Related manuals for MX-B382

Brands by name

Popular brands

Sharp MX-B382, Operation Manual

Search results

Summary of Contents for MX-B382

Reviews:

Related manuals for MX-B382

Brands by name

Popular brands