Sharp MX-B382, Operation Manual

Page: 79 / 830

1-37
BEFORE USING THE MACHINE
Contents
This section explains how to place originals in the automatic document feeder and on the document glass.
PLACING THE ORIGINAL
PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT
FEEDER
This section explains how to place originals in the automatic document feeder.
Allowed original sizes
When the original is a non-standard size, see the appropriate explanation below for the mode you are using.
☞
2. COPIER " SPECIFYING THE ORIGINAL SIZE " (page 2-29)
☞
4. FACSIMILE " IMAGE SETTINGS " (page 4-45)
☞
5. SCANNER / INTERNET FAX " IMAGE SETTINGS " (page 5-54)
Allowed original weights
ORIGINALS
Minimum original size Maximum original size
Standard sizes
A5: 148 mm (height) x 210 mm (width)
5-1/2" (height) x 8-1/2" (width)
Non-standard sizes
(Minimum size that can be specified manually)
MX-B382:
1-sided scanning: 100 mm (height) x 89 mm (width)
(4" (height) x 3-1/2" (width))
2-sided scanning: 100 mm (height) x 148 mm (width)
(4" (height) x 5-7/8" (width))
MX-B382SC:
51 mm (height) x 85 mm (width)
(2" (height) x 3-1/4" (width))
Standard sizes
A4: 210 mm (height) x 297 mm (width)
8-1/2" (height) x 14" (width)
Non-standard sizes
(Maximum size that can be specified manually)
Copy mode: 216 mm (height) x 356 mm (width)
8-1/2" (height) x 14" (width)
Image send mode: 216 mm (height) x 500 mm (width)
8-1/2" (height) x 19-5/8" (width)
MX-B382 MX-B382SC
1-sided scanning
35 g /m
2
to 128 g /m
2
(9 lbs. to 32 lbs.) 35 g /m
2
to 280 g /m
2
(9 lbs. to 75 lbs.)
2-sided scanning
50 g /m
2
to 105 g /m
2
(13 lbs. to 28 lbs.) 50 g /m
2
to 280 g /m
2
(13 lbs. to 75 lbs.)
• For the MX-B382SC, when scanning originals from 129 g /m
2
to 280 g /m
2
(34 lbs. to 74 lbs.), select "Heavy
Exit" for the original exit place. For originals 129 g/m
2
(34 lbs.) or heavier, the scanned image may be distorted
depending on the type of original and the usage environment.
• To scan originals from 35
g
/m
2
to 49
g
/m
2
(9 lbs. to 14 lbs.), use "Slow Scan Mode" in the special modes.
Scanning without using "Slow Scan Mode" may result in original misfeeds.
When "Slow Scan Mode" is selected, automatic 2-sided scanning is not possible.