Sharp MX-B382, Operation Manual

Page: 199 / 830

2-40
COPIER
Contents
Enter the paper size of the bypass tray
When the [Custom Size] key is touched, the paper size entry screen appears.
Touch the X (width) numeric value display key to open a
number entry screen. Enter the width of the paper with
the numeric keys, and touch the [OK] key in the number
entry screen.
Touch the Y (height) numeric value display key to open a
number entry screen. Enter the height of the paper with
the numeric keys, and touch the [OK] key in the number
entry screen.
7
Select the bypass tray.
(1) Touch the paper size key of the bypass tray.
(2) Touch the [OK] key.
8
Press the [START] key.
Scanning begins.
• If the originals were placed in the document feeder tray, the originals are copied.
• If you placed the originals on the document glass, scan each page one page at a time.
When using sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then
press the [Read-End] key.
To cancel scanning of the original and copying...
Press the [STOP] key ( ).
Paper Select
Paper Tray Bypass Tray
OK
Plain
Plain
Plain
2. A5
A4
3. A4
4. A4
1.
Plain
A4
Plain
(1) (2)
OK
OK
(148~356)
mm
(100~216)
mm
297 X
Y 210
Bypass Tray Type/Size Setting
Size Input
X297 Y210
X297 Y210
X297 Y210
AB
Inch
• You can also touch the keys to change the number.
• Stored custom paper sizes appear in the keys on the left side of the screen. Custom paper sizes are stored in the system
settings. For details, see " Paper Tray Settings " (page 7-14) in "7. SYSTEM SETTINGS". If the key for the size that you
wish to enter appears, touch that key.