2-30
COPIER
Contents
Specifying a non-standard original size
•
System Settings (Administrator): Default original size setting
Set this if you frequently use a particular original size. The set size will appear in the [Original] key.
When this setting is configured, changing the original size can be omitted.
•
System settings (Administrator): Setting of Default Original Exit Place (MX-B382SC Only)
When the automatic document feeder is used, the original's default output destination can be set to the upper exit or the
heavy exit. (Except when "Size Input" or "Card Size" is selected for the original size.)
MX-B382SC Only
• In the situations below, the original exit place is fixed to the heavy exit.
- When "Card Size" is selected
- When the original guide is set to 74 mm (2-7/8") or lower (Except when "Check Size" is selected)
- When the automatic document feeder is scanning an original with an X (horizontal) value of 105 mm (4-1/8") or less
• When "Card Size" is selected, you cannot copy if the original guide is set to 74 mm (2-7/8") or higher.
1
Touch the [Size Input] key.
None
Original
OK
A5
B5
Size Input
216x343
A4
216x330
16K
216x340
Custom Size
Inch
AB
Summary of Contents for MX-B382
