MX-3114N SIMULATION 6 – 53
* Each temperature correction value: 1 count for 1
C change in temperature control
* Each paper exit count: 1 count = 1 sheet change
* Each cool down time: 1 count = 1sec change
Code descriptions
List of destination groups
43-31
Purpose
Adjustment/Setup
Function (Purpose)
Used to check the operation of the fusing
web cleaning.
Section
Fusing
Operation/Procedure
1)
Press [EXECUTE] key.
Cleaning the fusing web is performed.
2)
When cleaning the fusing web is completed, "COMPLETE" is
displayed.
The set value may be changed for a design change or an individual
arrangement. Except for the above cases, however, the set value
must not be changed. If it is changed, a trouble may be occur.
43-32
Purpose
Adjustment/Setup
Function (Purpose)
Used to set various items related to the
forcible operation of web cleaning when job
end. (26/31 cpm machine)
Section
Fusing
Operation/Procedure
1)
Select an item to be set with the scroll key.
2)
Enter the set value with 10-key.
3)
Press [OK] key.
The set value in step 2) is saved.
The set value may be changed for a design change or an individual
arrangement. Except for the above cases, however, the set value
must not be changed. If it is changed, a trouble may be occur.
V
HL_US THIN PAPER CL
Thin paper COL-TH_US
135
135
135
W
HL_UM THIN PAPER READY
Thin paper Ready-TH_UM
140
140
140
X
HL_UM REC PAPER BW
Recycled paper BW-TH_UM
150
155
160
Y
HL_LM REC PAPER BW
Recycled paper BW-TH_LM
110
110
110
Z
HL_US REC PAPER BW
Recycled paper BW-TH_US
140
155
165
AA
HL_UM REC PAPER CL
Recycled paper COL-TH_UM
150
155
160
AB
HL_LM REC PAPER CL
Recycled paper COL-TH_LM
110
110
110
AC
HL_US REC PAPER CL
Recycled paper COL-TH_US
140
155
165
AD
HL_UM REC PAPER READY
Recycled paper Ready-TH_UM
160
165
170
TH_UM
Fusing thermistor main (Front surface of paper)
HL_UM
Heater lamp main (Heat roller for front surface of paper)
TH_LM
Fusing thermistor main (Back surface of paper)
HL_LM
Heater lamp main (Heat roller for back surface of paper)
TH_US
Fusing thermistor sub (Front surface of paper)
HL_US
Heater lamp sub (Heat roller for front surface of paper)
Group
Destination
Group A
JAPAN
–
–
–
–
–
Group B
U. S. A
CANADA
INCH
–
–
–
Group C
EUROPE
U. K
AUS.
AB_A
AB_B
CHINA
Item/Display
Content
Default value
Group A
Group B
Group C
Fusing web unit
installation
detection state
Operation
Remarks
Fusing web unit not
installed
Does not operate
* During this operation, the
fusing web cleaning feed
counter is counted up.
Fusing web unit
installed
Operates for the
specified time.
Item/Display
Item
Setting
range
Default
value
A
JOB END
COMP ACT
CHECK
Fusing web motor
forcible operation
condition when job end
Enable
0 - 1
0
1
Disable
1
B
JOB END
COMP ACT
INTERVAL
Interval of the print quantity of
compulsory action of the fusing
web motor at job end
1 - 200
100
C
JOB END
COMP ACT
CNT
Number of forcible operations of
the fusing web motor when job
end
1 - 5
1
