MX3114N TROUBLESHOOTING 7 – 35
(3)
Inner finisher
3. Image send communication report code
A. Outline and code system descriptions
After completion of communication, the communication report
table, the communication management table, and the protocol are
described on the communication report column.
The communication report code is composed as follows:
Communication report: XX (XXXX)
The upper 2 digits of the communication report code:
Communication report code of 00 – 99 (Refer to communication
report main code.)
The lower 4 digits of the communication report code:
Used by the serviceman.
The upper 2 digits: Communication report sub code 1 (Refer to
communication report sub code 1.)
The lower 2 digits: Communication report sub code 2 (Refer to
communication report sub code 2.)
The communication report sub code 1 and sub code 2 are in hexa-
decimal notation. (The others are in decimal notation.)
The communication report sub code 1 is not used in the these mod-
els.
B. Details
(1)
Communication report main code
For report codes 16 – 31, V.34 MODE COMMUNICATION.
DPFD2_S4
DPFD2 remaining JAM (Desk 2 feed paper)
D2PPD ON
D2PPD does not turn OFF within the specified time.
TRAY4
Casette 4 (Desk 2) paper feed JAM
D2PFC ON (Paper feed start)
D2PPD does not turn ON within the specified time.
JAM code
JAM content
JAM detection method
JAM detection start trigger
JAM judgment condition
JAM code
JAM content
JAM detection method
Basic distance
(A) [mm]
JAM margin
distance (B)
[mm]
JAM detection
distance (A+B)
[mm]
JAM detection start
trigger
JAM judgment condition
FPPD1_N
Finisher inlet port
not-reached JAM
Machine paper exit
command reception
FPPD1 does not turn ON within the
specified time.
134.602 [mm]
400 [mm]
534.602 [mm]
FPPD1_S
Finisher inlet port
remaining JAM
(When Long-size paper
support OFF)
FPPD1 ON
FPPD1 does not turn OFF within
the specified time.
464.803 [mm]
50 [mm]
514.803 [mm]
Finisher inlet port
remaining JAM
(When Long-size paper
support ON)
FPPD1 ON
FPPD1 does not turn OFF within
the specified time.
1207.803 [mm]
50 [mm]
1257.803 [mm]
FPDD_S
Bundle exit remaining
JAM
Driving the bundle exit
roller is started.
FSTPD does not turn OFF within
the specified time.
133.1 [mm]
13.66 [mm]
146.76 [mm]
FIN_TIME
Finisher paper early
reaching JAM
FPPD1 ON by the
prior paper detection
FPPD1 of the next paper turns ON
at the timing earlier than the
specified paper interval.
Specified paper
interval time
30 [mm]
(Paper interval
time) - (Paper
transport time
of 30 [mm])
[msec]
FSTPD_S
Finisher paper exit
remaining JAM
Driving the paper exit
roller in the straight
mode is started.
FSTPD does not turn OFF within
the specified time.
96.76 [mm]
50 [mm]
146.76 [mm]
FSTPLJ
Staple JAM
FSHPS OFF after
FSM ON
FSHPS does not turn ON within the
specified time.
350 [msec]
250 [msec]
600 [msec]
Report
code
Final receive signal
(Send side)
Final receive signal (Receive side)
0
Abnormal signal
Abnormal signal
1
NSF, DIS
(SID), (SUB), NSS, DCS
2
CFR
(PWD), (SEP), NSC, DTC
3
FTT
EOP
4
MCF
EOM
5
PIP, PIN
MPS
6
RTN, RTP
PRI-Q
7
No signal, DCN
DCN
8
PPR
PPS-EOP
9
PPS-EOM
10
PPS-MPS, PPS-NULL
11
RNR
RR
12
CTR
CTC
13
ERR
EOR-Q
14
PPS-PRI-Q
16
Abnormal signal
Abnormal signal
17
NSF, DIS
SID, SUB, NSS, DCS
18
CFR
PWD, SEP, NSC, DTC
19
FTT
PPS-EOP
20
MCF
PPS-EOM
21
PIP, PIN
PPS-MPS, PPS-NULL
22
RTN, RTP
PRI-Q
23
No signal, DCN
DCN
24
PPR
25
RNR
RR
26
CTR
CTC
27
ERR
EOR-Q
28
PPS-PRI-Q
29
V.8 Phase-1
V.8 Phase-1
30
V.8 Phase-2
V.8 Phase-2
31
V.8 Phase-3
V.8 Phase-3
Report
code
Final receive signal
(Send side)
Final receive signal (Receive side)
