MX-3114N SIMULATION 6 – 119
67-27
Purpose
Adjustment/Setup
Function (Purpose)
Used to set the service target of the printer
mode auto color balance adjustment.
Section
Printer
Operation/Procedure
1)
Press [SETUP] key on the touch panel.
2)
Place the printed color balance adjustment pattern sheet
printed in SIM 67-25 on the document table.
3)
Press [EXECUTE] key.
The patch image of the adjustment pattern sheet is scanned.
4)
Press [OK] key.
The service target of the printer mode auto color balance
adjustment is set according to the scanned adjustment pattern
sheet patch images.
The registered color balance and the density are displayed.
Select a target color with [C] [M] [Y] [K] key.
This simulation is executed only when the printer color balance is
manually adjusted.
67-28
Purpose
Adjustment/Setup
Function (Purpose)
Used to set the default of the service target
of the printer mode auto color balance
adjustment.
Section
Printer
Operation/Procedure
1)
Press [EXECUTE] key.
2)
Press [YES] key.
The service target of the printer mode auto color balance
adjustment is set to the default.
The service color balance target and the color balance target
for the user color balance adjustment are set to the same color
balance as the factory color balance target.
67-31
Purpose
Data clear
Function (Purpose)
Used to clear the printer calibration value.
Section
Printer
Operation/Procedure
1)
Press [EXECUTE] key.
2)
Press [YES] key.
The printer calibration data (Halftone correction data) are
cleared.
(The printer color balance correction is canceled.)
67-33
Purpose
Adjustment/Setup
Function (Purpose)
Used to change the gamma of the printer
screen.
Section
Printer
Operation/Procedure
1)
Select a target change color with [K] [C] [M] [Y] key on the
touch panel.
2)
Select a target screen with [SCREEN] key.
3)
Select a target adjustment density level with scroll key.
4)
Enter the set value with 10-key.
5)
Press [OK] key. (The set value is saved.)
When [EXECUTE] key is pressed, the check pattern in printed in
the color balance and density corresponding to the adjustment
value.
PCL/PS printer
GDI Printer
B
Point B target value
C
Point C target value
D
Point D target value
E
Point E target value
F
Point F target value
G
Point G target value
H
Point H target value
I
Point I target value
J
Point J target value
K
Point K target value
L
Point L target value
M
Point M target value
N
Point N target value
O
Point O target value
BASE
Background sampling value
Item/Display
Content
Setting
range
Default
value
A
POINT1
Point 1
0 - 255
128
B
POINT2
Point 2
0 - 255
128
C
POINT3
Point 3
0 - 255
128
D
POINT4
Point 4
0 - 255
128
E
POINT5
Point 5
0 - 255
128
F
POINT6
Point 6
0 - 255
128
G
POINT7
Point 7
0 - 255
128
H
POINT8
Point 8
0 - 255
128
I
POINT9
Point 9
0 - 255
128
J
POINT10
Point 10
0 - 255
128
K
POINT11
Point 11
0 - 255
128
L
POINT12
Point 12
0 - 255
128
M
POINT13
Point 13
0 - 255
128
N
POINT14
Point 14
0 - 255
128
O
POINT15
Point 15
0 - 255
128
P
POINT16
Point 16
0 - 255
128
Q
POINT17
Point 17
0 - 255
128
Display
Content
SCREEN1
600dpi 1bit Photo
SCREEN2
600dpi 1 bit Graphics
SCREEN3
600dpi 4 bit Photo
SCREEN4
600dpi 4 bit Graphics
SCREEN7
B/W 600dpi 1 bit
SCREEN8
B/W 600dpi 4 bit
SCREEN10
Gloss
Display
Content
SCREEN1
600dpi 1bit Low (Photo)
Gloss 600dpi 1bit
SCREEN2
600dpi 1bit High (Graphics)
SCREEN7
B/W 600dpi 1bit
