manualshive.com logo in svg

Sharp MX-2314N, Service Manual

The Sharp MX-2314N is a high-performance multifunctional printer designed to streamline office productivity. Get started effortlessly with the comprehensive Start Manual, available for instant free download from our website. Explore its advanced features and unleash your potential with this powerful device.

Share
Download
background image

MX-3114N  SIMULATION  6 – 5

30

1

Used to check the operations of the sensors and the detectors in other than the paper feed section and the 
control circuits.

2

Used to check the operations of the sensors and the detectors in the paper feed section and the control 
circuits.

33

2

Used to delete the ID (IDM) information of Felica card. 

40

2

Manual paper feed tray paper width sensor adjustment.

Paper feed

7

Used to set the adjustment value of the manual paper feed tray paper width sensor.

Paper feed

41

1

Used to check the operations of the document size sensor and the control circuit.

2

Used to adjust the document size sensor detection level.

3

Used to check the operations of the document size sensor and the control circuit.

43

1

Used to set the fusing temperature in each mode.

2

Fusing temperature setting.

4

Used to set the fusing temperature 2 in each mode. (Continued from SIM 43-1.)

20

Used to set the environmental correction under low temperature and low humidity (L/L) for the fusing 
temperature setting (SIM 43-1) in each paper mode.

21

Used to set the environment correction under high temperature and high humidity (H/H) for the fusing 
temperature setting (SIM 43-1) in each paper mode.

22

Used to set the environment correction under low temperature and low humidity (L/L) for the fusing 
temperature setting (SIM 43-4) in each paper mode.

23

Used to set the environment correction under high temperature and high humidity (H/H) for the fusing 
temperature setting (SIM 43-4) in each paper mode.

24

Used to set the correction of the temperature adjustment value of SIM 43-1 and 43-4.

31

Used to check the operation of the fusing web cleaning. 

Fusing

32

Used to set various items related to the forcible operation of web cleaning when job end. 

Fusing

44

1

Used to set each correction operation function in the image forming (process) section.

Image process (Photoconductor/
Developing/Transfer/Cleaning)

2

Used to adjust the sensitivity of the image density sensor (registration sensor).

Process

4

Used to set the conditions of the high density process control operation.

Process

6

Used to execute the high density process control forcibly.

Process

9

Used to display the result data of the high density process control operation.

Image process (Photoconductor/
Developing/Transfer/Cleaning)

12

Used to display the operation data of the high density process control and the image density sensor 
(registration sensor).

Image process (Photoconductor/
Developing)

14

Used to display the output level of the temperature and humidity sensor.

Process (OPC drum, development)/
Fusing/LSU

15

Used to set the OPC drum idle rotation.

Process

21

Used to set the halftone process control target.

Process

22

Used to display the toner patch density level in the halftone process control operation.

Process

24

Used to display the correction target and the correction level in the halftone process control operation.

Process

25

Used to set the calculating conditions of the correction value for the halftone process control.

Process

26

Used to execute the halftone process control compulsory.

Process

27

Used to clear the correction data of the halftone process control.

Process

28

Used to set the process control execution conditions.

Process

29

Used to set the operating conditions of the process control during a job.

Process

31

Used to adjust the OPC drum phase. (Manual adjustment)

Process

37

Used to set the development bias correction level in the continuous printing operation.

43

Used to display the identification information of the developing unit.

Developing system

62

Used to set the process control execution conditions.

Process

46

1

Used to adjust the copy density in the copy mode.

2

Used to adjust the copy density in the copy mode.

4

Used to adjust the density in the image send mode.

5

Used to adjust the density in the image send mode.

8

Used to adjust the image send mode color balance RGB.

9

Used to adjust the scan image density.

10

Used to adjust the copy color balance and the gamma (for each color copy mode).

16

Used to adjust the monochrome copy density and the gamma (for each monochrome copy mode).

19

Used to set the operating conditions for the density scanning (exposure) of monochrome auto copy mode 
documents.

21

Copy color balance adjustment (Manual adjustment)

23

Used to set the density correction of copy high density section (High density tone gap supported).

24

Copy color balance adjustment (Auto adjustment)

25

Used to adjust the copy color balance. (Single color copy mode)

26

Used to reset the single color mode color balance set value to the default.

27

Used to adjust the gamma/density of copy images, texts, and line image edges.

30

Used to adjust the resolution in the sub scanning direction in the copy mode.

32

Used to adjust the document background density reproducibility in the monochrome auto copy mode.

36

Used to adjust the colors in the 2-color copy mode.

37

Used to adjust the reproduction capability of monochrome mode color.

38

Used to adjust the black component amount in the color copy mode.

39

Used to adjust the sharpness of FAX send images.

40

Used to adjust the FAX send image density. (Collective adjustment of all the modes)

41

Used to adjust the FAX send image density. (Normal)

Main

Sub

Functions

Section

Summary of Contents for MX-2314N













































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MX-2314N

Samsung CLP-36 Series Manual preview
CLP-36 Series
Brand: Samsung Pages: 9
Samsung Bixolon SRP-500 Command Manual preview
Bixolon SRP-500
Brand: Samsung Pages: 27
Samsung 550N - CLP Color Laser Printer User Manual preview
550N - CLP Color Laser Printer
Brand: Samsung Pages: 288
Samsung 2 COLOR THERMAL PRINTER SRP-275 Quick Reference Manual preview
2 COLOR THERMAL PRINTER SRP-275
Brand: Samsung Pages: 8
Samsung CLP-300 Brochure & Specs preview
CLP-300
Brand: Samsung Pages: 6
Samsung CLP-300 User Manual preview
CLP-300
Brand: Samsung Pages: 91
LabelTac Pro X User Manual preview
Pro X
Brand: LabelTac Pages: 15
Xerox DocuPrint C2200 User Manual preview
DocuPrint C2200
Brand: Xerox Pages: 200
Savin 8025e Operating Instructions Manual preview
8025e
Brand: Savin Pages: 160
QuickLabel Systems QL800 User Manual preview
QL800
Brand: QuickLabel Systems Pages: 122
Lexmark 34A0252 Troubleshooting Manual preview
34A0252
Brand: Lexmark Pages: 9
ABLE Systems Ap890 User Manual preview
Ap890
Brand: ABLE Systems Pages: 12
AstroJet M1DX Operator'S Manual preview
M1DX
Brand: AstroJet Pages: 97
Rockwell Automation Allen-Bradley ClearMark Quick Start Manual preview
Allen-Bradley ClearMark
Brand: Rockwell Automation Pages: 16
Oki OkiPos 407II Installation Manual preview
OkiPos 407II
Brand: Oki Pages: 8
Xerox WorkCentre Pro 421 System Administrator Manual preview
WorkCentre Pro 421
Brand: Xerox Pages: 162
aqprox! appPOS80WIFI User Manual preview
appPOS80WIFI
Brand: aqprox! Pages: 52
Thermo Scientific invitrogen EVOS FL Quick Reference preview
invitrogen EVOS FL
Brand: Thermo Scientific Pages: 6

Brands by name

Popular brands

Load more brands