manualshive.com logo in svg

Sharp MX-2314N, Service Manual

The Sharp MX-2314N is a high-performance multifunctional printer designed to streamline office productivity. Get started effortlessly with the comprehensive Start Manual, available for instant free download from our website. Explore its advanced features and unleash your potential with this powerful device.

Share
Download
background image

MX-3114N  SIMULATION  6 – 26

 

23-80

Purpose

Operation test/check

Function (Purpose)

Used to check the operation of paper feed
and paper transport in the paper feed sec-
tion and the paper transport section. Used
to output the list of the operation status of
the sensor and the detectors in the paper
feed section and the paper transport sec-
tion.

Section

Paper feed, Paper transport

Operation/Procedure

When [EXECUTE] key is pressed, the timing list of paper feed and
paper transport is outputted.

Used to print the operations timing list of the sensors and detectors
in the paper feed and transport section.

The timing list of paper feed and paper transport operations of the
latest job (copy or print) on the final paper is printed.

Since the paper feed and paper transport routes differ depending
on the used paper feed tray and the print operation mode, the sen-
sor and the detectors and the operation timing also differ.

 

24

 

24-1

Purpose

Data clear

Function (Purpose)

Used to clear the jam counter, and the trou-
ble counter. (After completion of mainte-
nance, clear the counters.)

Section

Operation/Procedure

1)

Select the item to be cleared with the touch panel key.

2)

Press [EXECUTE] key.

3)

Press [YES] key.

The target counter is cleared.

 

24-2

Purpose

Data clear

Function (Purpose)

Used to clear the number of use (the num-
ber of prints) of each paper feed section.

Section

Operation/Procedure

1)

Select the item to be cleared with the touch panel key.

2)

Press [EXECUTE] key.

3)

Press [YES] key.

The target counter is cleared.

 

24-3

Purpose

Data clear

Function (Purpose)

Used to clear the finisher, RSPF, and the
scan (reading) unit counter.

Section

Operation/Procedure

1)

Select the item to be cleared with the touch panel key.

2)

Press [EXECUTE] key.

3)

Press [YES] key.

The target counter is cleared.

 

24-4

Purpose

Data clear

Function (Purpose)

Used to clear the maintenance counter, the
printer counters of the transport unit and
the fusing unit. (After completion of mainte-
nance, clear the counters.)

Section

Operation/Procedure

1)

Select the item to be cleared with the touch panel key.

2)

Press [EXECUTE] key.

3)

Press [YES] key.

The target counter is cleared.

JAM CODE

Jam code

DATA/TIME

Jam happened date and time

MODE

Mode at the time of jam happened

SIZE

Paper size

TYPE

Paper type

PIC TRAY

Paper feed tray

OUT TRAY

Output tray

SECTION

Operation content (Trigger name - Detection operatopn or 
load operation name)

STANDARD

Reference value (ms)

JAM-1

Operation timing (ms) of the paper before one sheet of the 
jam

MACHINE

Machine JAM counter

SPF

RSPF JAM counter

TROUBLE

Trouble counter

TRAY1

Tray 1 paper feed counter

TRAY2

Tray 2 paper feed counter

TRAY3

Tray 3 paper feed counter

TRAY4

Tray 4 paper feed counter

MFT TOTAL

Manual paper feed counter (Total)

MFT HEAVY

Manual paper feed counter (Heavy paper)

MFT OHP

Manual paper feed counter (OHP)

MFT ENV

Manual paper feed counter (Envelope)

ADU

ADU paper feed counter

SPF

RSPF document feed counter 
(No. of discharged sheets)

SCAN

Scan counter

STAPLER

Staple counter

PUNCHER

Puncher counter

STAMP

Stamp counter

COVER

Document cover open/close counter

HP_ON

Number of scanner HP detection

OC LAMP TIME

Total lighting time of the scanner lamp

Item/Display

Content

Maintenance

MAINTENANCE 
ALL

Maintenance counter (Total) (Counter)

Maintenance counter (Total) 
(Number of use days)

MAINTENANCE 
COL

Maintenance counter (Color) (Counter)

Maintenance counter (Color) 
(Number of use days)

Summary of Contents for MX-2314N













































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MX-2314N

Unitech MP200 Product Reference Manual preview
MP200
Brand: Unitech Pages: 18
Unitech MP200 Developer'S Manual preview
MP200
Brand: Unitech Pages: 26
Panduit MP200 Firmware Update Instruction Manual preview
MP200
Brand: Panduit Pages: 6
Panasonic Panafax UF-7000 Network Connection preview
Panafax UF-7000
Brand: Panasonic Pages: 28
Panasonic KX-PS8000 Setup Manual preview
KX-PS8000
Brand: Panasonic Pages: 68
Panasonic KX-MC6020 Instrucciones De Funcionamiento preview
KX-MC6020
Brand: Panasonic Pages: 120
Panasonic Workio DP-C262 Operating Instructions Manual preview
Workio DP-C262
Brand: Panasonic Pages: 100
Panasonic KX-MB781 - B/W Laser - All-in-One Instrucciones De Funcionamiento preview
KX-MB781 - B/W Laser - All-in-One
Brand: Panasonic Pages: 96
Panasonic Workio DP-6010 Operating Instructions Manual preview
Workio DP-6010
Brand: Panasonic Pages: 130
Oki 10i Maintenance Manual preview
10i
Brand: Oki Pages: 210
Panasonic FP-D355 User Manual preview
FP-D355
Brand: Panasonic Pages: 77
Panasonic FP-7818 Service Manual & Parts Manual preview
FP-7818
Brand: Panasonic Pages: 402
Panasonic DP-8020E Quick Manual preview
DP-8020E
Brand: Panasonic Pages: 54
Panasonic Workio DP-8016P Operating Instructions Manual preview
Workio DP-8016P
Brand: Panasonic Pages: 88
Panasonic DP-1510P Operating Instructions Manual preview
DP-1510P
Brand: Panasonic Pages: 60
Samsung CJX-1050W Quick Install Manual preview
CJX-1050W
Brand: Samsung Pages: 2
TallyGenicom 6300 Series Maintenance Manual preview
6300 Series
Brand: TallyGenicom Pages: 175
Oki MC160N User Manual preview
MC160N
Brand: Oki Pages: 268

Brands by name

Popular brands

Load more brands