MX-3114N SIMULATION 6 – 121
67-43
Purpose
Adjustment
Function (Purpose)
2 Color mode balance adjustment
Section
Printer
Operation/Procedure
1)
Select an adjustment item with the scroll key.
2)
Enter the set value with 10-keys.
3)
Press [OK] key.
67-45
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the printer image filter and
trapping.
Section
Printer
Operation/Procedure
1)
Select an adjustment item with the scroll key.
2)
Enter the set value.
3)
Press [OK] key.
67-52
Purpose
Adjustment/Setup
Function (Purpose)
Used to set the default of the gamma of the
printer screen.
Section
Printer
Operation/Procedure
1)
Select a target default setting mode with the touch panel.
Press [ALL] key to select all the modes.
2)
Press [EXECUTE] key and press [YES] key.
When the printer screen gamma was changed by SIM 67-33,
SIM67-54, it is reset to the default.
PCL/PS printer
GDI printer
Item/Display
Content
Color
Setting
range
Default value
C
M
Y
A
RED
R output
color
CMY
0 - 255
0
235
224
B
GREEN
G output
color
CMY
0 - 255
180
0
241
C
BLUE
B output
color
CMY
0 - 255
235
159
0
D
CYAN
C output
color
CMY
0 - 255
182
0
25
E
MAGENTA
M output
color
CMY
0 - 255
0
217
0
F
YELLOW
Y output
color
CMY
0 - 255
0
0
234
Item/Display
Content
Setting
range
Default
value
NOTE
A
SHARPNESS:
COLOR PRINT
Color print
0 - 4
2
The greater
the set value
is, the
stronger the
filer
enhancement
is. The smaller
the set value
is, the
stronger the
filter
smoothness
is.
(0: Soft High,
1: Soft Low, 2:
Center, 3:
Sharp Low, 4:
Sharp High)
B
SHARPNESS:
B/W PRINT
Monochrome
print
0 - 4
2
C
TRAPPING:
CMY (PCL &
DIRECTPRINT)
CMY
(PCL, Direct
Print)
0 - 5
3
The greater
the set value
is, the
stronger the
trapping is.
(0: OFF, (Low)
1 < 2 < 3 < 4 <
5)
(The target is
vector images.
There is no
effect for the
raster
images.)
However, the
sharpness
also varies.
D
TRAPPING: K
(PCL &
DIRECTPRINT)
K
(PCL, Direct
Print)
0 - 5
3
E
TRAPPING:
CMY (PS)
CMY (PS)
0 - 5
3
F
TRAPPING: K
(PS)
K (PS)
0 - 5
0
G
TRAPPING:
CMY (XPS)
CMY (XPS)
0 - 5
0
H
TRAPPING: K
(XPS)
K (XPS)
0 - 5
0
Item/Display
Content
Screen
HEAVYPAPER
Heavy paper screen
Printer heavy paper automatic density
correction amount
600DPI_1BIT
SCREEN1 (600dpi 1bit Photo)
SCREEN2 (600dpi 1bit Graphics)
B/W
SCREEN7 (600dpi 1bit Graphics)
SCREEN8 (600dpi 1bit Graphics)
SCREEN9 (600dpi 1bit Graphics)
Printer B/W toner save automatic density
correction amount
GLOSSPAPER
SCREEN10 (Glossy paper screen)
Display
Content
600DPI 1BIT
600dpi 1bit Low (Photo)
600dpi 1bit High (Graphics)
Gloss 600dpi 1bit
B/W
B/W 600dpi 1bit
Item/Display
Content
Setting
range
Default
value
NOTE
