manualshive.com logo in svg

Sharp MX-2314N, Service Manual

The Sharp MX-2314N is a high-performance multifunctional printer designed to streamline office productivity. Get started effortlessly with the comprehensive Start Manual, available for instant free download from our website. Explore its advanced features and unleash your potential with this powerful device.

Share
Download
background image

MX-3114N  SIMULATION  6 – 3

3. List of simulation codes

Main

Sub

Functions

Section

1

1

Used to check the operation of the scanner (reading) unit and the control circuit.

Scanner (reading)

2

Used to check the sensors in the scanner (reading) section and the related circuits.

Scanner (reading)

5

Used to check the operation of the scanner (reading) unit and the control circuit.

Scanner (reading)

2

1

Used to check the operations of the automatic document feeder and the control circuit.

RSPF

2

Used to check the operations of the sensors and the detectors in the automatic document feeder section 
and the control circuits.

RSPF

3

Used to check the operations of the loads in the automatic document feeder and the control circuit.

RSPF

3

2

Used to check the operations of the sensors and the detectors in the finisher and the control circuit.

Finisher

3

Used to check the operation of the load in the finisher and the control circuit.

Finisher

10

Used to adjust the finisher.

Finisher

4

2

Used to check the operations of the sensors and detectors in the desk, and the control circuit of those.

Desk

3

Used to check the operations of the loads in the desk, and the control circuit of those.

Desk

5

Used to check the operations of the paper feed desk paper transport clutch (DTRC).

Desk

5

1

Used to check the operation of the display, LCD in the operation panel, and control circuit.

Operation panel

2

Used to check the operation of the heater lamp and the control circuit.

Fusing

3

Used to check the operation of the scanner lamp and the control circuit.

Scanner (reading)

4

Used to check the operation of the discharge lamp and the control circuit.

Process

6

1

Used to check the operations of the load in the paper transport system (clutches and solenoids) and the 
control circuits.

Paper transport/Paper exit section

2

Used to check the operations of each fan motor and its control circuit.

Others

3

Used to check the operations of the transport unit and the control circuit.

Process (Transport)

6

Used to perform fusing pressure release and applying, and to check the operations of the control circuits.

Fusing

90

Used to reset the machine to the factory setting. (The scanner is set to the lock enable position)

Scanner

7

1

Used to set the operating conditions of aging.

Others

6

Used to set the operating intermittent aging cycle.

8

Used to display the warm-up time.

9

Color setting in the color copy test mode (Used to check the copy operation and the image quality for each 
color).

12

The document reading number of sheets setting (for aging operation)

RSPF

8

1

Used to check and adjust the operations of the developing voltage in each print mode and the control 
circuit. * When the middle speed is adjusted, the low speed are also adjusted simultaneously.

Process (Developing)

2

Used to check and adjust the operation of the main charger grid voltage in each printer mode and the 
control circuit. * When the middle speed is adjusted, the low speed are also adjusted simultaneously.

Process (Charging)

6

Used to check and adjust the operation of the transport voltage and the control circuit.

Process (Transport)

9

2

Used to check the operations of the sensors and detectors in the paper reverse section (duplex section) 
and its control circuit.

Duplex

3

Used to check the operations of the load in the paper reverse section (duplex section) and its control 
circuit.

Duplex

10

1

Used to check the operations of the toner supply mechanism (toner motor) and the related circuit.

Process (Developing)

13

-

Used to cancel the self-diag "U1" trouble.

14

-

Used to cancel the self-diag H3, H4, H5 troubles.

15

-

Used to cancel the self-diag "U6" trouble.

16

-

Used to cancel the self-diag "U2" trouble.

MFP PWB / PCU PWB / SCU PWB

21

1

Used to set the maintenance cycle.

22

1

Used to check the print count value in each section and each operation mode. 
(Used to check the maintenance timing.)

2

Used to check the total number of misfeed and troubles. 
(When the number of total jam is considerably great, it is judged as necessary for repair.)

3

Used to check misfeed positions and the misfeed count of each position. 
* Presumption of the faulty point by this data is possible.

4

Used to check the trouble (self diag) history.

5

Used to check the ROM version of each unit (section).

Firmware

6

Used to output the setting/adjustment data (simulation, FAX soft switch, counter), the firmware version, 
and the counter list.

8

Used to check the number of operations (counter value) of the finisher, the RSPF, and the scan (reading) 
unit.

9

Used to check the number of use (print quantity) of each paper feed section.

Paper feed, ADU

10

Used to check the system configuration (option, internal hardware).

11

Used to check the use frequency (send/receive) of FAX. (Only when FAX is installed)

FAX 

12

Used to check the RSPF misfeed positions and the number of misfeed at each position. (When the number 
of misfeed is considerably great, it can be judged as necessary for repair.)

RSPF

13

Used to check the operating time of the process section (OPC drum, DV unit, toner cartridge) and the 
fusing unit

Process

14

Used to display the use status of the toner cartridge.

Process

18

Used to display the user data delete history.

19

Used to check the values of the counters related to the scan - image send.

40

Used to display the error code list and the contents.

90

Used to output the various set data lists.

Summary of Contents for MX-2314N













































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MX-2314N

Oki 10i Read Me First preview
10i
Brand: Oki Pages: 16
Oce COLOR SYSTEM 110 Operator'S Manual preview
COLOR SYSTEM 110
Brand: Oce Pages: 392
JICCODA LE-1 Quick Install Manual preview
LE-1
Brand: JICCODA Pages: 46
VASTEX V-1000 Installation And Operating Insctructions preview
V-1000
Brand: VASTEX Pages: 2
Xerox WorkCentre Pro 90 Compatibility Manual preview
WorkCentre Pro 90
Brand: Xerox Pages: 36
Oce Arizona 180 GL User Manual preview
Arizona 180 GL
Brand: Oce Pages: 268
EFI Mimaki JV150 User Manual preview
Mimaki JV150
Brand: EFI Pages: 4
Xerox 4250 - WorkCentre - Copier Specifications preview
4250 - WorkCentre - Copier
Brand: Xerox Pages: 4
Tascam P11/TAS Technical Documentation preview
P11/TAS
Brand: Tascam Pages: 2
Canon imagePRESS V1000 Customer Expectation Document preview
imagePRESS V1000
Brand: Canon Pages: 123
Plockmatic LCT3500 Operator'S Manual preview
LCT3500
Brand: Plockmatic Pages: 76
SATO FX3-LX Driver Manual preview
FX3-LX
Brand: SATO Pages: 100
Canon imageCLASS LBP325dn Getting Started preview
imageCLASS LBP325dn
Brand: Canon Pages: 36
Canon imageCLASS LBP161dn+ Getting Started preview
imageCLASS LBP161dn+
Brand: Canon Pages: 24
Canon ImageCLASS LBP720 Series Important Safety Instructions Manual preview
ImageCLASS LBP720 Series
Brand: Canon Pages: 20
Canon imageCLASS LBP6300dn Quick Setup Manual preview
imageCLASS LBP6300dn
Brand: Canon Pages: 2
Canon imageCLASS LBP6780dn Quick Setup Manual preview
imageCLASS LBP6780dn
Brand: Canon Pages: 2
Canon imageCLASS X MF1643i II Setup Manual preview
imageCLASS X MF1643i II
Brand: Canon Pages: 16

Brands by name

Popular brands

Load more brands