MX-3114N SIMULATION 6 – 36
(Contents of set items)
A: Enable/Disable setting of the toner preparation message display.
B: The toner remaining quantity at which the toner preparation
message is displayed.
C: Enable/Disable setting of the toner preparation message display
when the toner near end status is reached.
D: Machine operation at toner end
E: Number of allowable copy/print/FAX when the toner near end
message is displayed. (Range: 0 - 50 sheets)
The number of output print allowed in item D is based on the
assumption that the sheets are of A4 size with print ratio of 5%.
(The number of outputs allowed differs depending on the paper
size and the print ratio.)
When item A is set to "0" and item E is properly set, printing can be
made after toner near end. However, improper phenomena such as
insufficient density, thin spots, or improper color balance may result
depending on the using conditions. When item E is set to "1" print-
ing is disabled after toner near end. In this case, toner end display
is made in the toner near end status, and copy/print/FAX outputs
are disabled.
26-73
Purpose
Setting
Function (Purpose)
Enlargement continuous shoot, A3 wide
copy mode image loss (shade delete quan-
tity) adjustment
Section
Operation/Procedure
1)
Select an item to be set with scroll keys.
2)
Enter the set value with 10-key.
3)
Press [OK] key.
When the adjustment value is increased, the image loss
(shade delete quantity) is increased.
26-74
Purpose
Setting
Function (Purpose)
Used to set the OSA trial mode.
Section
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
26-78
Purpose
Setting
Function (Purpose)
Used to set the password of the remote
operation panel.
Section
Operation/Procedure
1)
Enter a password with 10-key. (5 - 8 digits)
The entered password is displayed on the column of "NEW".
In order to correct the entered password, press the [clear] key
to delete the entered value one digit by one digit.
2)
Press [SET] key.
26-79
Purpose
Setting
Function (Purpose)
Used to set YES/NO of the pop-up display
of user data delete result.
Section
Operation/Procedure
1)
Enter the set value with 10-key.
The value for the display operation specification after comple-
tion of user data delete is set.
2)
Press [OK] key.
EUROPE
0
(Displayed)
4 (Displayed
when the
toner
remaining
quantity is
25%.)
0
(Displayed)
2
(Print
operation
stopped)
U.K.
0
(Displayed)
4 (Displayed
when the
toner
remaining
quantity is
25%.)
0
(Displayed)
AUS.
0
(Displayed)
4 (Displayed
when the
toner
remaining
quantity is
25%.)
0
(Displayed)
AB_A
0
(Displayed)
4 (Displayed
when the
toner
remaining
quantity is
25%.)
0
(Displayed)
CHINA
0
(Displayed)
4 (Displayed
when the
toner
remaining
quantity is
25%.)
0
(Displayed)
1
(Print
operation
continued)
Destination
Setting value
Toner
preparation
message
Toner
preparation
time
Toner near
end
message
Enable/
Disable of
print job
continuation
at toner end
Item/Display
Content
Setting
range
Default value
A
DELETING
SHADOW ADJ
(M)
Rear frame side
image loss quantity
(shade delete
quantity) adjustment
0 - 50
0
(Adjustment
amount:
0.1mm/step)
B
DELETING
SHADOW ADJ (S)
Lead edge image
loss quantity (shade
delete quantity)
adjustment
0 - 50
0
(Adjustment
amount:
0.1mm/step)
Item/Display
Content
Setting
range
Default
value
A
OSA TRIAL MODE
(0: YES 1: NO)
0
Used to set the
OSA trial mode.
0 - 1
1
1
OSA trial mode is
canceled.
Item/Display
Content
Setting range
Default
value
A
DISP SET
User data delete result
pop-up display ON
YES
1
0 (NO)
User data delete result
pop-up display OFF
NO
0
