manualshive.com logo in svg

Sharp MX-2314N, Service Manual

The Sharp MX-2314N is a high-performance multifunctional printer designed to streamline office productivity. Get started effortlessly with the comprehensive Start Manual, available for instant free download from our website. Explore its advanced features and unleash your potential with this powerful device.

Share
Download
background image

MX-3114N  EXTERNAL VIEW AND INTERNAL STRUCTURE  4 – 17

13

Transport roller 5 (Idle)

Apply a pressure to paper and the transport roller to provide the transport power of the transport roller to 
paper.

14

Transport roller 5 (Drive)

Transports paper to the registration roller. Paper is buckled between the registration roller and this roller to 
correct the paper skew and the relation between images and paper.

15

Registration roller (Drive)

Transports paper to the transfer section. / Controls the transport timing of paper and adjusts relative relations 
between the image and paper.

16

Registration roller (Idle)

Apply a pressure to paper and the registration roller to provide the transport power of the transport roller to 
paper.

17

Transport roller 6 (Drive)

Transports paper transported from the fusing section to the paper exit section and the switchback section.

18

Transport roller 6 (Idle)

Apply a pressure to paper and the transport roller to provide the transport power of the transport roller to 
paper.

19

Transport roller 7 (Idle)

Apply a pressure to paper and the transport roller to provide the transport power of the transport roller to 
paper.

20

Transport roller 7 (Drive)

Transports paper transported from the switchback section to the transport roller 8.

21

Transport roller 8 (Idle)

Apply a pressure to paper and the transport roller to provide the transport power of the transport roller to 
paper.

22

Transport roller 8 (Drive)

Transports paper transported from the transport roller 7 to the transport roller 9.

23

Transport roller 9 (Idle)

Apply a pressure to paper and the transport roller to provide the transport power of the transport roller to 
paper.

24

Transport roller 9 (Drive)

Transports paper transported from the transport roller 8 to the transport roller 5.

25

Paper exit roller 1 (Idle)

Apply a pressure to paper and the paper exit roller to provide the transport power of the paper exit roller to 
paper.

26

Paper exit roller 1 (Drive)

Transports paper to the left paper exit section.

27

Paper exit roller 2 (Idle)

Apply a pressure to paper and the paper exit roller to provide the transport power of the paper exit roller to 
paper.

28

Paper exit roller 2 (Drive)

Discharges paper to the right paper exit tray.

29

Fusing roller (F1)

Heats the fusing belt.

30

Fusing roller (F2)

The cushion layer of the roller forms a wide nip between the fusing belt and fusing roller (B).

31

Fusing roller (B)

Heats the back surface of paper to fuse toner on the paper.

32

Fusing web roller

Cleans the fusing roller (B) and the fusing belt.

33

Document pickup roller (RSPF)

Feeds a document to the paper feed roller.

34

Paper feed roller (RSPF)

Feeds a document to the transport section. Makes a buckle on paper between the registration roller and this 
roller to correct the start position of document skew and document image scan.

35

Separation roller (RSPF)

Separates a document to prevent double-feeding.

36

Transport auxiliary roller (RSPF)

Reduces friction between a document and the paper guide to transport the document smoothly to the 
registration roller.

37

Registration roller (Drive) (RSPF)

Transports a document to the transport roller 2. / Controls the transport timing of the document and adjusts 
the document scanning timing.

38

Registration roller (Idle) RSPF)

Apply a pressure to a document and the registration roller to provide the transport power of the transport 
roller to the document.

39

Transport roller 2 (Idle) (RSPF)

Apply a pressure to a document and the transport roller to provide the transport power of the transport roller 
to the document.

40

Transport roller 2 (Drive) (RSPF)

Transports a document transported from the registration roller to the document scanning section.

41

Transport roller 3 (Idle) (RSPF)

Apply a pressure to a document and the transport roller to provide the transport power of the transport roller 
to the document.

42

Transport roller 3 (Drive) (RSPF)

Transports a document transported from the document scanning section to the paper exit roller.

43

Paper exit roller (Idle) (RSPF)

Apply a pressure to a document and the paper exit roller to provide the transport power of the paper exit roller 
to the document.

44

Paper exit roller (Drive) (RSPF)

Discharges a document. Switchbacks the document and transports it to the registration roller when scanning 
the back surface.

45

Transport roller 10 (Drive)

Transports paper from manual paper feed section to the transport roller 9.

46

Transport roller 10 (Idle)

Apply a pressure to paper and the transport roller to provide the transport power of the transport roller to 
paper.

47

Paper exit roller 3 (Drive)

Transports paper to paper exit roller 2 or transport roller 7.

48

Paper exit roller 3 (Idle)

Apply a pressure to paper and the paper exit roller to provide the transport power of the paper exit roller to 
paper.

No.

Name

Function/Operation

Summary of Contents for MX-2314N













































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MX-2314N

Canon ImageCLASS MF4570dw Basic Operation Manual preview
ImageCLASS MF4570dw
Brand: Canon Pages: 164
Canon imagePRESS C800 Series Service Manual preview
imagePRESS C800 Series
Brand: Canon Pages: 132
Canon ImageCLASS MF5730 Technical Information preview
ImageCLASS MF5730
Brand: Canon Pages: 2
Oki C831 Safety And Warranty Manual preview
C831
Brand: Oki Pages: 48
F+D Feinwerk- und Drucktechnik TOP-ino Operating Instructions Manual preview
TOP-ino
Brand: F+D Feinwerk- und Drucktechnik Pages: 22
Fargo Persona C25 Printer Selection Manual preview
Persona C25
Brand: Fargo Pages: 6
Fargo DTC4500e User Manual preview
DTC4500e
Brand: Fargo Pages: 90
Fargo DTC1000 User Manual preview
DTC1000
Brand: Fargo Pages: 126
FARGO electronics FARGO DTC 400 User Manual preview
FARGO DTC 400
Brand: FARGO electronics Pages: 278
Magicard Rio Pro Getting Started Manual preview
Rio Pro
Brand: Magicard Pages: 30
Magicard Rio Pro User Manual preview
Rio Pro
Brand: Magicard Pages: 35
Magicard MAGICARD ID Card Printer Driver Manual preview
MAGICARD ID Card Printer
Brand: Magicard Pages: 30
Magicard Rio 2e Brochure preview
Rio 2e
Brand: Magicard Pages: 6
Canon MP280 Getting Started Manual preview
MP280
Brand: Canon Pages: 31
Oki OKIPAGE14e Setup Manual preview
OKIPAGE14e
Brand: Oki Pages: 28
Oki OKIPAGE14e Limited Warranty preview
OKIPAGE14e
Brand: Oki Pages: 22
Canon image RUNNER 3045 Manual preview
image RUNNER 3045
Brand: Canon Pages: 14
Oki ES2024 User Manual preview
ES2024
Brand: Oki Pages: 512

Brands by name

Popular brands

Load more brands