MX-3114N SIMULATION 6 – 70
* To increase the density in the high density area further, set items
A and B to "1".
The tone gap may occur in high density part.
Do not change the values of items C, D, E, and F. If these values
are changed, the density in the high density area is changed.
46-24
Purpose
Adjustment
Function (Purpose)
Copy color balance adjustment
(Auto adjustment)
Section
Operation/Procedure
1)
Press [EXECUTE] key.
The color patch image (adjustment pattern) is printed out.
2)
Plate the printed adjustment pattern on the document table,
select [FACTORY] or [SERVICE] mode.
3)
Press [EXECUTE] key.
The copy color balance automatic adjustment is performed,
then the adjustment result pattern is printed.
4)
Press [OK] key.
The halftone correction target registration is processed.
46-25
Purpose
Adjustment
Function (Purpose)
Used to adjust the copy color balance. (Sin-
gle color copy mode)
Section
Operation/Procedure
1)
Select an adjustment target color with [C][M][Y] keys on the
touch panel.
2)
Select an adjustment target item with scroll key on the touch
panel.
3)
Enter the set value with 10-key.
4)
Press [OK] key. (The set value is saved.)
When the adjustment value is increased, the image density of the
target color is increased, and vice versa.
46-26
Purpose
Adjustment
Function (Purpose)
Used to reset the single color mode color
balance set value to the default.
Section
Operation/Procedure
1)
Press [EXECUTE] key.
2)
Press [YES] key.
The color balance value of the single color mode is reset to the
default value.
46-27
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the gamma/density of copy
images, texts, and line image edges.
Section
Operation/Procedure
1)
Select a target item of setting with scroll key on the touch
panel.
2)
Enter the set value with 10-key.
3)
Press [OK] key. (The set value is saved.)
When the adjustment values of items A, C, and E are changed, the
gamma of text and line edge image density section is changed.
When the adjustment value is increased, the image contrast of
character edge and line edge is increased. When the adjustment
value is decreased, the image contrast of character and line edge
is decreased.
When the adjustment values of items B, D, and F are increased,
the image density of text and line edge section is decreased, and
vice versa.
*1 : 23cpm machine : Disable without HDD
46-30
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the resolution in the sub
scanning direction in the copy mode.
Section
Operation/Procedure
1)
Refer to the following table, and enter the set value corre-
sponding to the resolution mode with 10-key.
2)
Press [OK] key. (The set value is saved.)
Item/Display
Setting range
Default value
C
M
Y
A
RED
0 - 255
0
255
200
B
GREEN
0 - 255
255
0
255
C
BLUE
0 - 255
255
150
0
D
CYAN
0 - 255
255
0
0
E
MAGENTA
0 - 255
0
255
0
F
YELLOW
0 - 255
0
0
255
Item/Display
(Copy mode)
Content
Setting
range
Default
value
A
BLACK TEXT
(SLOPE)*1
Black character edge
gamma skew adjustment
1 - 99
50
B
BLACK TEXT
(INTERCEPT)*1
Black character edge
density adjustment
1 - 99
50
C
COLOR TEXT
(SLOPE)*1
Color character edge
gamma skew adjustment
1 - 99
50
D
COLOR TEXT
(INTERCEPT)*1
Color character edge density
adjustment
1 - 99
50
E
ED TEXT
(SLOPE)
Text/Map mode gamma
adjustment (Text/Map mode)
1 - 99
50
F
ED TEXT
(INTERCEPT)
Text/Map mode density
adjustment (Text/Map mode)
1 - 99
50
Item/Display
Content
Setting
range
Default
value
A
SCAN
RESOLUTION
SW
Scan resolution
selection
(COPY: COLOR)
Mode1
0 - 1
0
0
Mode2
1
Mode
Scan
mode
Resolution in the sub scanning direction (DPI)
25-99%
[Magnification
ratio]
100-200%
[Magnification
ratio]
201-400%
[Magnification
ratio]
Mode1
OC
600
600
1200
RSPF
600
600
1200
Mode2
OC
300
600
1200
RSPF
400
600
1200
