manualshive.com logo in svg

Sharp MX-2314N, Service Manual

The Sharp MX-2314N is a high-performance multifunctional printer designed to streamline office productivity. Get started effortlessly with the comprehensive Start Manual, available for instant free download from our website. Explore its advanced features and unleash your potential with this powerful device.

Share
Download
background image

MX3114N  TROUBLESHOOTING  7 – 27

 

U2-91

PCU PWB EEPROM check sum error

 

U6-00

PCU PWB - Paper feed desk (paper
feed tray 3, 4) communication trouble

 

U6-01

Paper feed tray 3 lift trouble

 

U6-02

Paper feed tray 4 lift trouble

 

U6-10

Desk paper feed unit paper transport
motor trouble

 

U6-50

Desk - Main unit combination trouble

 

U6-52

PCU PWB - Paper feed desk (paper
feed tray 2) communication trouble

 

U7-50

MFPC PWB - Vendor machine 
communication error

 

U7-51

Vendor machine error

Trouble content

Detail

PCU

Cause

PCU PWB EEPROM trouble
PCU PWB trouble
EEPROM socket contact trouble

Check & Remedy

Replace the PCU PWB EEPROM.
Replace the PCU PWB.
Check contact of the EEPROM socket.
Use SIM16 to cancel the trouble. (The check sum 
error detection data are calculated again to reset the 
proper check sum data.)

Trouble content

Detail

PCU

Cause

Connection trouble of the connector and the harness.
Paper feed desk control PWB trouble
PCU PWB trouble

Check & Remedy

Check connection of the connector and the harness.
Replace the paper feed desk control PWB.
Replace the PCU PWB.

Trouble content

D1ULD does not turn ON within the specified time 
when lift-up operation.

Detail

PCU

Cause

D1ULD sensor trouble.
Desk control PWB trouble.
Lift unit trouble.
Connection trouble of the connector and the harness.
PCU PWB trouble.

Check & Remedy

Replace the D1ULD sensor.
Replace the desk control PWB.
Replace the lift unit.
Check connection of the connector and the harness.
Replace the PCU PWB.

Trouble content

D2ULD does not turn ON within the specified time 
when lift-up operation.

Detail

PCU

Cause

D2ULD sensor trouble
Desk control PWB trouble
Lift unit trouble
Connection trouble of the connector and the harness.
PCU PWB trouble

Check & Remedy

Replace the D2ULD sensor.
Replace the desk control PWB.
Replace the lift unit.
Check connection of the connector and the harness.
Replace the PCU PWB.

Trouble content

Detail

PCU

Cause

Desk paper feed motor trouble (motor lock, motor rpm 
abnormality, over-current to the motor).
Desk control PWB trouble
Connection trouble of the connector and the harness.

Check & Remedy

Use SIM4-3 to check the operation of the desk 
transport motor.
Replace the desk control PWB.
Replace the desk paper feed motor.
Check connection of the connector and the harness.

Trouble content

Detail

PCU

Cause

Improper combination between the main unit and the 
desk.
Desk control PWB trouble.

Check & Remedy

Install a desk which is proper for the main unit mode.
Replace the desk control PWB.

Trouble content

Paper feed tray 2 (desk unit) is not recognized.

Detail

PCU

Cause

Connection failure between the machine and paper 
feed tray 2 (desk unit)
PCU PWB trouble.

Check & Remedy

Check connection of the connector and the harness.
Replace the PCU PWB.

Trouble content

Communication error between the MFP and the serial 
vendor.

Detail

MFP

Cause

Improper setting of the vendor machine specifications 
(SIM26-3).
Vendor machine trouble.
MFPC PWB trouble.
Connector, harness connection trouble.
Strong external noises.

Check & Remedy

Cancel the error by turning OFF/ON the power.
Check the connector and the harness in the 
communication line.
Change the specifications of the vendor machine 
(SIM26-3).
Replace the MFPC PWB.

Trouble content

Detail

MFP (Notification of a trouble from the serial vendor)

Cause

Serial vendor machine trouble.
Connector, harness connection trouble.

Check & Remedy

Err.XX is displayed on the operation panel of the 
vendor. (XX is the detail code.)
Repair the vendor machine referring to the detail code. 
Check the connector and the harness in the 
communication line.

Summary of Contents for MX-2314N













































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MX-2314N

Panasonic KX-MC6260E Quick Reference Manual preview
KX-MC6260E
Brand: Panasonic Pages: 24
Oki 10i Help Manual preview
10i
Brand: Oki Pages: 40
Panasonic Workio DP-1820E Quick Manual preview
Workio DP-1820E
Brand: Panasonic Pages: 38
Xerox Document WorkCentre 480cx User Manual preview
Document WorkCentre 480cx
Brand: Xerox Pages: 318
Xerox Phaser 3010 User Manual preview
Phaser 3010
Brand: Xerox Pages: 76
Xerox ColorQube 9301 Quick Manual preview
ColorQube 9301
Brand: Xerox Pages: 11
Xerox ColorQube 9303 User Manual preview
ColorQube 9303
Brand: Xerox Pages: 352
Xerox Color 560 Printer Specification Sheet preview
Color 560 Printer
Brand: Xerox Pages: 2
Xerox B1022 System Administrator Manual preview
B1022
Brand: Xerox Pages: 105
Xerox AltaLink B8145 Manual preview
AltaLink B8145
Brand: Xerox Pages: 42
Xerox AltaLink B8145 Getting Started Manual preview
AltaLink B8145
Brand: Xerox Pages: 13
Xerox D110 Manual preview
D110
Brand: Xerox Pages: 132
Xerox CopyCentre C2128 Product Safety Data Sheet preview
CopyCentre C2128
Brand: Xerox Pages: 2
Xerox Legacy 4112 User Manual Supplement preview
Legacy 4112
Brand: Xerox Pages: 20
Xerox Legacy 4112 Quick Start Manual preview
Legacy 4112
Brand: Xerox Pages: 34
Xerox 700i Specification preview
700i
Brand: Xerox Pages: 8
Xerox 4890 Advanced Troubleshooting Manual preview
4890 Advanced
Brand: Xerox Pages: 70
Xerox Nuvera 100 Installation Planning Manual preview
Nuvera 100
Brand: Xerox Pages: 124

Brands by name

Popular brands

Load more brands