manualshive.com logo in svg

Sharp MX-2314N, Service Manual

The Sharp MX-2314N is a high-performance multifunctional printer designed to streamline office productivity. Get started effortlessly with the comprehensive Start Manual, available for instant free download from our website. Explore its advanced features and unleash your potential with this powerful device.

Share
Download
background image

MX-3114N  ADJUSTMENTS AND SETTINGS  5 – 33

2)

Enter the SIM 67-27 mode.

3)

Press [SETUP] key.

4)

Set the color patch image (adjustment pattern) correctly
adjusted and printed in the printer color balance adjustment
(Manual adjustment) (SIM 67-25) (ADJ 10E (2)) on the docu-
ment table.

A color patch image (adjustment pattern) printed by another
machine can be used.

Set the pattern so that the light density side is on the left side.
Place 5 sheets of white paper on the color patch image
(adjustment pattern).

This procedure must not be executed when the copy color bal-
ance (manual) was adjusted with SIM 67-25 to a unique color
balance requested by the user and it was registered as the
service color balance target with SIM 67-27.

5)

Press [EXECUTE] key.

The color patch image (adjustment pattern) is read.

6)

Press [REPEAT] key, set the second color patch image
(adjustment pattern), and execute the procedure 5) again.

The color balance (gamma) target set level of each color (K, C,
M and Y) can be checked with K/C/M/Y keys.

Check that the set level is increased in the sequence of B - Q
(MAX). If there is no variation or variation is reversed, it is
judged as abnormal.

In case of an abnormality, repair the problem and try again.

7)

Press [OK] key.

The color balance (gamma) of the color patch image (adjust-
ment pattern) used in the procedure 5) is set as the service tar-
get.

(Procedures to set the service color balance target and the
color balance target for the user color balance adjustment to
the same color balance as the factory color balance target)

This procedure must not be executed when the copy color balance
was adjusted with SIM 67-25 to a unique color balance requested
by the user and it was registered as the service color balance tar-
get with SIM 67-27.

When the factory color balance target is changed with SIM 67-26,
be sure to execute this procedure.

1)

Enter the SIM 67-28 mode.

2)

Press [EXECUTE] key.

3)

Press [YES] key.

The service color balance target and the color balance target for
the user color balance adjustment are set to the same color bal-
ance as the factory color balance target.

 

10-B

Copy/Printer color balance and density 
adjustment (Automatic adjustment) 
(Basic adjustment)

This adjustment must be performed in the following cases:

* When a consumable part (developer, OPC drum, transfer belt) is

replaced.

* When the CCD unit is replaced.

* When the scanner (reading) section is disassembled.

* When the scanner (reading) unit is replaced.

* U2 trouble has occurred.

* When the MFP PWB is replaced.

* When the EEPROM on the MFP PWB is replaced.

* The scanner control PWB has been replaced.

* The EEPROM on the scanner control PWB has been replaced.

a. General

SIM46-74 is used to perform the automatic copy color balance and
density adjustment (SIM46-24) and the automatic printer color bal-
ance and density adjustment (SIM67-24) continuously.

Since it is desirable to perform the copy color balance adjustment
(automatic adjustment) before the automatic printer color balance
and density adjustment, it is advisable to perform the adjustment in
this mode.

This mode is also advisable to effectively perform both of the auto-
matic copy color balance and density adjustment (SIM46-24) and
the automatic printer color balance and density adjustment (SIM67-
24). It saves considerable time when compared with performing
each of the auto copy/printer color balance and the density adjust-
ment individually.

The color balance adjustment (automatic adjustment) is used to
adjust the copy density of each of Cyan, Magenta, Yellow, and
Black automatically.

When this adjustment is executed, the color balance adjustments
of all the copy/printer modes are revised.

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

6&$11(57$5*(72)35,17(5&2/2(&$/,%6(7836(59,&(

6(783

%&'()

*+,-.

/012

.

&

0

<

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

6&$11(57$5*(72)35,17(5&2/2(&$/,%6(7836(59,&(

(;(&87(

12:&+$573$7&+5($',1*

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

6&$11(57$5*(72)35,17(5&2/2(&$/,%6(7836(59,&(

%$6(

%&'()

*+,-.

/012

.

&

0

<

2.

5(3($7

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

67$1'$5'6&$11(57$5*(72)35,17(5&2/25&$/,%6(59,&(

(;(&87(

$5(<28685("

<(6

12

Summary of Contents for MX-2314N













































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MX-2314N

Unitech MP200 Product Reference Manual preview
MP200
Brand: Unitech Pages: 18
Unitech MP200 Developer'S Manual preview
MP200
Brand: Unitech Pages: 26
Panduit MP200 Firmware Update Instruction Manual preview
MP200
Brand: Panduit Pages: 6
Samsung CLP-600 Series User Manual preview
CLP-600 Series
Brand: Samsung Pages: 115
BIXOLON SRP-500 Command Manual preview
SRP-500
Brand: BIXOLON Pages: 29
Partner RP-320 User Manual preview
RP-320
Brand: Partner Pages: 15
FOREVER Flex-Soft Quick Start Manual preview
Flex-Soft
Brand: FOREVER Pages: 2
Citizen iDP-3535 Service Manual preview
iDP-3535
Brand: Citizen Pages: 37
Konica Minolta bizhub C308 Quick User Manual preview
bizhub C308
Brand: Konica Minolta Pages: 4
Canon i960 Series Quick Start Manual preview
i960 Series
Brand: Canon Pages: 28
Canon i455 Series Printing Manual preview
i455 Series
Brand: Canon Pages: 4
Canon i475D Series Specifications preview
i475D Series
Brand: Canon Pages: 2
Canon i9950 Print Manual preview
i9950
Brand: Canon Pages: 20
Canon i475D Series Quick Start Manual preview
i475D Series
Brand: Canon Pages: 31
Canon i560 Series Specifications preview
i560 Series
Brand: Canon Pages: 2
Canon i900D Series Service Manual preview
i900D Series
Brand: Canon Pages: 52
Canon i80 Series Quick Start Manual preview
i80 Series
Brand: Canon Pages: 32
Canon i550 User Manual preview
i550
Brand: Canon Pages: 93

Brands by name

Popular brands

Load more brands