MX-3114N SIMULATION 6 – 17
9
9-2
Purpose
Operation test/check
Function (Purpose)
Used to check the operations of the sen-
sors and detectors in the paper reverse
section (duplex section) and its control cir-
cuit.
Section
Duplex
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
The code names of the sensors and the detectors which are active
are highlighted.
9-3
Purpose
Operation test/check
Function (Purpose)
Used to check the operations of the load in
the paper reverse section (duplex section)
and its control circuit.
Section
Duplex
Operation/Procedure
1)
Select the item to be operation checked with the touch panel
key.
2)
Press [EXECUTE] key.
The selected load performs the operation.
When [EXECUTE] key is pressed, the operation is terminated.
*: Not used, but the button is displayed.
10
10-1
Purpose
Operation test/check
Function (Purpose)
Used to check the operations of the toner
supply mechanism (toner motor) and the
related circuit.
Section
Process (Developing)
Operation/Procedure
1)
Select a target of the operation check with the touch panel key.
When [ALL] key is pressed, all the items are selected.
2)
Press [EXECUTE] key.
The selected load operation is performed for 10 sec.
When [EXECUTE] key is pressed, the operation is terminated.
This simulation must be executed without installing the toner car-
tridges.
If this simulation is executed with the toner cartridges installed,
toner will be forcibly supplied to the developing unit, resulting in
overtoner.
If this simulation is erroneously executed with the toner cartridges
installed, overtoner state may be deleted by making a few black
background copy in the single color copy mode of the target color.
S
TC2 HEAVY2 CL
Secondary transfer bias
adjustment value
Color
Heavy paper 2
51 - 255
83
83
T
TC2 HEAVY2 BW
Black/
White
51 - 255
69
69
U
TC2 HEAVY3 CL
Color
Heavy paper 3
51 - 255
83
83
V
TC2 HEAVY3 BW
Black/
White
51 - 255
69
69
W
TC2 OHP CL
Color
OHP
51 - 255
69
69
X
TC2 OHP BW
Black/
White
51 - 255
69
69
Y
TC2 ENVELOPE CL
Color
Envelope
51 - 255
69
69
Z
TC2 ENVELOPE BW
Black/
White
51 - 255
69
69
AA
TC2 THIN CL
Color
Thin paper
51 - 255
96
103
AB
TC2 THIN BW
Black/
White
51 - 255
96
103
AC
TC2 GLOSSY CL
Color
Gloss paper
51 - 255
83
83
AD
TC2 GLOSSY BW
Black/
White
51 - 255
69
69
AE
TC2 CLEANING
Secondary transfer
cleaning bias
adjustment value
Cleanig process (negative pole)
51 - 255
59
59
AF
TC2 CLEAN LOW SPD
Low speed print mode
0 - 255
26
26
AG
TC2 CLEAN MIDDLE SPD
Middle apeed print mode
0 - 255
26
26
AH
TC2 CLEAN CLEANING
Cleaning bias (positive pole)
0 - 255
102
102
AI
PTC LOW SPEED CL
PTC current adjustment
value
Color
Low speed
51 - 255
73
73
AJ
PTC MIDDLE SPEED CL
Middle apeed
51 - 255
73
73
AK
PTC LOW SPEED BW
Black/
White
Low speed
51 - 255
73
73
AL
PTC MIDDLE SPEED BW
Middle apeed
51 - 255
73
73
AM
CASE VOLT LOW CL
PTC voltage adjustment
value
Color
Low speed
0 - 255
0
0
AN
CASE VOLT MID CL
Middle apeed
0 - 255
0
0
AO
CASE VOLT LOW BW
Black/
White
Low speed
0 - 255
0
0
AP
CASE VOLT MID BW
Middle apeed
0 - 255
0
0
Item/Display
Content
Setting
value
Default value
23cpm
26cpm/31cpm
APPD1
ADU paper transport detector 1
APPD2
ADU paper transport detector 2
DSW_ADU
ADU paper guide open/close detector
Display
Content
ADUC1
ADU transport clutch 1 (*)
ADUM
ADU motor
ADUGS
ADU gate solenoid (26cpm/31cpm)
