Sharp MX-2314N, Service Manual

Page: 199 / 524

MX-3114N SIMULATION 6 – 66
(When PROCON TARGET is selected.)
2A) Select the density level.
(When PROCON MODE is selected.)
2B) Select the execution frequency of the process control.
3) Press [EXECUTE] key.
4) Press [YES] key.
This simulation may not function with some firmware versions.
In such a case, the firmware must be upgraded to the latest ver-
sion.
46
46-1
Purpose Adjustment (Color copy mode)
Function (Purpose) Used to adjust the copy density in the copy
mode.
Section
Operation/Procedure
1) Select an adjustment target item with scroll key on the touch
panel.
2) Enter the set value with 10-key.
* When the key is pressed, the setting value of each
item can be changed with 1up (1down) collectively.
3) Press [OK] key. (The set value is saved.)
To adjust the copy density in the low density area, select the "LOW"
mode and change the adjustment value. To adjust the copy density
in the high density area, select the "HIGH" mode and change the
adjustment value.
When the adjustment value is increased, the copy density is
increased. When the adjustment value is decreased, the copy den-
sity is decreased.
46-2
Purpose Adjustment (Monochrome copy mode)
Function (Purpose) Used to adjust the copy density in the copy
mode.
Section
Operation/Procedure
1) Select an adjustment target item with scroll key on the touch
panel.
2) Enter the set value with 10-key.
* When the key is pressed, the setting value of each
item can be changed with 1up (1down) collectively.
3) Press [OK] key. (The set value is saved.)
To adjust the copy density in the low density area, select the "LOW"
mode and change the adjustment value. To adjust the copy density
in the high density area, select the "HIGH" mode and change the
adjustment value.
When the adjustment value is increased, the copy density is
increased. When the adjustment value is decreased, the copy den-
sity is decreased.
PROCON
MODE HIGH QUALITY1 The execution frequency of the process
control is high. (It is set when the color
image quality is given priority.)
HIGH QUALITY2 The execution frequency of the process
control is highest. (It is set when the color
image quality is given priority.)
PRINT
PERFORMANCE The execution frequency of the process
control is low. (It is set when the job
speed is given priority.)
BW MODE The process control is executed in the
normal frequency. (It is set when there
are little color jobs and many
monochrome jobs.)
NORMAL The process control is executed in the
normal frequency.
Item/Display Content
Setting
range
Default
value
A AUTO Auto LOW 1 - 99 50
HIGH 1 - 99 50
B TEXT Text LOW 1 - 99 50
HIGH 1 - 99 50
C TEXT/PRINTED
PHOTO Text/Printed
Photo LOW 1 - 99 50
HIGH 1 - 99 50
D TEXT/PHOTO Text/Photograph LOW 1 - 99 50
HIGH 1 - 99 50
E PRINTED PHOTO Printed Photo LOW 1 - 99 50
HIGH 1 - 99 50
F PHOTOGRAPH Photograph LOW 1 - 99 50
HIGH 1 - 99 50
Display/Item Content
G MAP Map LOW 1 - 99 50
HIGH 1 - 99 50
H LIGHT Light document LOW 1 - 99 50
HIGH 1 - 99 50
I TEXT(COPY TO
COPY) Text (Copy
document) LOW 1 - 99 50
HIGH 1 - 99 50
J TEXT/PRINTED
PHOTO (COPY TO
COPY) Text/Printed
Photo (Copy
document) LOW 1 - 99 50
HIGH 1 - 99 50
K PRINTED PHOTO
(COPY TO COPY) Printed Photo
(Copy
document) LOW 1 - 99 50
HIGH 1 - 99 50
L TEXT (COLOR
TONE
ENHANCEMENT) Text (Color tone
enhancement) LOW 1 - 99 50
HIGH 1 - 99 50
M TEXT/PRINTED
PHOTO (COLOR
TONE
ENHANCEMENT) Text/Printed
Photo
(Color tone
enhancement) LOW 1 - 99 50
HIGH 1 - 99 50
N TEXT/PHOTO
(COLOR TONE
ENHANCEMENT) Text/Photograph
(Color tone
enhancement) LOW 1 - 99 50
HIGH 1 - 99 50
O PRINTED PHOTO
(COLOR TONE
ENHANCEMENT) Printed Photo
(Color tone
enhancement) LOW 1 - 99 50
HIGH 1 - 99 50
P PHOTOGRAPH
(COLOR TONE
ENHANCEMENT) Photograph
(Color tone
enhancement) LOW 1 - 99 50
HIGH 1 - 99 50
Q MAP (COLOR
TONE
ENHANCEMENT) Map
(Color tone
enhancement) LOW 1 - 99 50
HIGH 1 - 99 50
R SINGLE COLOR Single color LOW 1 - 99 50
HIGH 1 - 99 50
S SINGLE COLOR
(COPY TO COPY) Single color
(Copy
document) LOW 1 - 99 50
HIGH 1 - 99 50
T TWO COLOR 2-color (red/
black) copy LOW 1 - 99 50
HIGH 1 - 99 50
U TWO COLOR
(COPY TO COPY) 2-color (red/
black) copy
(copy document) LOW 1 - 99 50
HIGH 1 - 99 50
Item/Display Content
Setting
range
Default
value
A AUTO1 Auto 1 LOW 1 - 99 50
HIGH 1 - 99 50
B AUTO2 Auto 2 LOW 1 - 99 50
HIGH 1 - 99 50
Item/Display Content
Setting
range
Default
value