manualshive.com logo in svg

Sharp MX-2314N, Service Manual, Page: 378 / 524

Share
Download
Sharp MX-2314N Service Manual Download Page 378

MX-3114N  DISASSEMBLY AND ASSEMBLY  10 – 32

b. MC unit

1)

Remove the cover, and slide the MC unit to the rear side to
remove.

When replacing the MC unit, do not touch the MC grid surface.

When attaching the cover, check to confirm that the seat
attached to the cover is not in contact with the MC grid.

Check to confirm that the MC grid of the MC unit is not in con-
tact with the lens and that it is not deformed.

c. Cleaning blade

1)

Remove the lens. Remove the cleaning blade.

When toner is attached to the lens, wipe with dry cloth or cloth
immersed in alcohol.

Do not touch the tip of the cleaning blade.

d. Toner reception blade

1)

Remove the toner reception blade.

When replacing the toner reception blade, attach a new one to
the reference.

e. Side seals F/R

1)

Remove the side seals F/R.

When replacing the side seals F/R, attach the cleaning blade
in advance, then attach a new seal to the reference.

Thoroughly clean the frame surface of any old glue residue
before attaching the new seals.

2

1

3

1

2

2

2

Bump reference

0 - +0.5mm

Bump reference
0 - +0.5mm

Blade edge reference

Blade edge reference

Bump reference

0 - +0.2mm

Summary of Contents for MX-2314N













































































































































































































































































































































































































































































































































Reviews:

No comments