Tel: 886.909 602 109 Email: [email protected]
99
4.1.1.3 Sweep Sin
Fig.4.3 Sweep Sin Dialog
Sweep Sin Dialog, shown in Fig.4.3, enables you to set parameters such as Freq Start, Freq
Stop and Sweep Time of Sweep Sin.
4.1.1.4 Dual Freq
Fig.4.4 Dual Freq Dialog
Dual Freq Dialog, shown in Fig.4.4, enables you to set parameters such as Frequency1,
Frequency2 and Freq 2 Ampl Percent of Dual Sin.
NOTE
Frequency unit
All frequency parameters in Hertz (Hz) are acceptable. Digital input must be terminated in four
frequency units (GHz, MHz, kHz or Hz).
4.1.2 Amplitude
Press
【
Amplitude
】
key on the front panel or click [Amplitude] menu item in user interface, and
the amplitude-related menu will pop up to enable you to set frequency-related parameters. The main
operation dialogs are as follows:
