Tel: 886.909 602 109 Email: [email protected]
16
5)
High power device test
The S1465-D series has output power up to 1W to allow high power devices to be tested without
connecting to an external amplifier. Also, it overcomes the test system loss and provides higher
signal power accuracy and stability.
6)
Excitation signal and local oscillator substitution
The S1465 series signal generator has extremely pure signal quality and high output power,
making it suitable for signal excitation of various amplifiers and an ideal substitution as a local
oscillator for the one in devices under test such as the transmitter, receiver, etc.
Fig. 1.15 Application of S1465 series signal generator in Local Oscillator Substitution
1.2 Safety guide
Please carefully read and strictly follow the precautions below!
We will spare no effort to ensure that all production processes meet the latest safety standards
and provide users with the highest security. Our product and its auxiliary equipment have been
designed and tested in accordance with relevant safety standards, and a quality assurance system
has been established for product quality monitoring to ensure that the product complies with these
standards. To keep the equipment in good condition and ensure safe operation, please observe the
precautions in this manual. In case of any doubt, please contact us for consultation.
In addition, it is your responsibility to use this product properly. Please carefully read and follow
safety instructions prior to use. This product is applicable to measurement in industrial and laboratory
environments or on the site. Always remember to use this product within its restricted conditions to
avoid personal injury or property damage. Any problems caused by failure to use this product
properly or as required are to be accounted by yourself, and we will not bear any responsibility
therefrom.
Therefore, please always follow the safety instructions to prevent any risks of
personal injury or property damage.
Please keep the basic safety instructions and product
document properly and deliver them to the end user.
1.2.1 Safety signs
1.2.1.1 Safety signs on the product
The warning signs on the product are given as follows (see Table 1.1):