Tel: 886.909 602 109 Email: [email protected]
39
7
Q output
BNC female, channel Q output of internal baseband signal generator.
8
Q output
BNC female, channel Q output of internal baseband signal generator.
9
IQ clock
SMA female, IQ serial clock input in baseband mode and external data
source, with level compatibility of 3.3V-LVTTL
10
IQ data
SMA female, IQ serial data input in baseband mode and external data
source, with level compatibility of 3.3V-LVTTL.
11
Trigger input
SMA female, external trigger signal input in baseband and arbitrary
waveform mode, with level compatibility of 3.3V-LVTTL.
12
Code-pattern
trigger
input
SMA female, external code-patter trigger input in baseband and
arbitrary waveform mode, with level compatibility of 3.3V-LVTTL.
13
Symbol clock
SMA female, symbol clock input in baseband mode and external data
source, with level compatibility of 3.3V-LVTTL.
14
Marker 1
Output token 1 of arbitrary waveform setting for arbitrary waveform
modulation.
15
Marker 2
Output token 2 of arbitrary waveform setting for arbitrary waveform
modulation.
16
Marker 3
Output token 3 of arbitrary waveform setting for arbitrary waveform
modulation.
17
Marker 4
Output token 4 of arbitrary waveform setting for arbitrary waveform
modulation.
18
Power button
Master power switch of the instrument.
19
Power input
Power plug, parameter requirements: 220 V (±10%), 50 Hz (±5%),
200W.
20
1-50MHz input
BNC female, receiving frequency reference signals of 1-50MHz, step
1Hz and -5~+10dBm from external time base.
21
10MHz output
BNC female, signal level>+4dBm, typical output impedance of 50Ω.
22
LAN
It is used for software upgrading and control.
23
USB
It is used for connecting a mouse, a keyboard, system software
upgrading and data backup.
24
Source module port
It is used for millimeter-wave SPSP, supporting frequency multiplier
source module of S82406 series produced by Saluki.
25
GPIB
Standard IEEE488 interface, support SCPI language.
26
Sweep output
BNC female, outputting voltage proportional to sweep frequency, 0V
and 10V corresponding to frequency start and stop, respectively
(0-10V corresponds to overall frequency range in CW working mode).
27
Z-axis
blanking/frequency
scale output
BNC female, outputting positive pulse (+5V for load of 2kΩ) during
flyback of RF output or band switching; outputting negative pulse (-5V)
for RF output = activated frequency scale frequency.
28
Trigger output
It outputs 1μs TTL low pulse for each frequency conversion in sweep
mode.
29
Fly-back output
It outputs TTL high level when sweep starts, and TTL low level when
sweep stops.
30
Stop sweep
BNC female, outputting TTL high level when sweep starts, and TTL low
level when sweep stops, a forced stop of sweep is allowed when