Tel: 886.909 602 109 Email: [email protected]
156
Programmable command:
[:SOURce]:DM:SOURce EXTernal| INTernal
[:SOURce]:DM:SOURce
？
Example:
[:SOURce]:DM:SOURce EXT
Set I/Q Data Source as EXT.
4.2.6.12 Output Adj
1) Output Adj ON/OFF
Functional Description:
This command sets I/Q Output Adj to ON/OFF state.
Parameter specification:
<State>
Boolean data is as follows:
ON | 1: I/Q Output Adj is turned on,
OFF | 0: I/Q Output Adj is turned off.
Programmable command:
[:SOURce]:DM:IQADjustment:OUTPut[:STATe] ON|OFF|1|0
[:SOURce]:DM:IQADjustment:OUTPut [:STATe]?
Example:
DM:IQADjustment:OUTPut 1
I/Q Output Adj is turned on.
2)Output Attenuation
Functional Description:
This command sets the attenuation of I/Q output adjustment. This command works when I/Q
Output Adj is turned on.
Parameter specification:
<Atten>
Attenuation of I/Q Output Adj.
Range: 0dB [0dB
，
94.5dB].
Programmable command:
[:SOURce]:DM:IQADjustment:OUTPut:ATTen <val>
[:SOURce] :DM:IQADjustment:OUTPut:ATTen?
Example:
:DM:IQADjustment:OUTPut:ATTen 10dB
Set Attenuation of I/Q Output Adj to 10 dB.
3)Gain Balance
Functional Description:
This command sets Gain Balance of I/Q Output Adj. This command works when I/Q Output Adj is
turned on
Parameter specification:
<Gain>
Gain Balance of I/Q Output Adj.
Range: 0dB [-4dB
，
4dB].
Programmable command:
