Tel: 886.909 602 109 Email: [email protected]
41
2.3.1.2 Common methods of configuration
settings
NOTE
The instrument supports operation by screen touch or front panel.
The GUI of S1465 series signal generator can be operated by screen touch or front panel, and
the following sections describe the operation of common settings. Method 1 is operation by screen
touch, and method 2 is by front panel.
1)
【
RF ON/OF
】
operation
Method 1:
Click the [RF] function area
in the main information display area on the
screen to turn on RF and click this button to turn it off.
Method 2:
Press the
【
RF ON/OF
】
key on the front panel to switch on or off RF.
2)
Setting the frequency of CW
Method 1:
Click the [Frequency] function area
in the configuration information
display area on the screen to open the Frequency Configuration Dialog; click the [CW] edit box which
is selected, enter a value and press the unit key.
Method 2:
Press the
【
Frequency
】
on the front panel to open the Frequency Configuration
Dialog, turn the knob (RPG) on the front panel to select an entry. An entry is selected when a
yellow-lined box appears around
【
CW
】
.
Press the knob (PRG) to make the
【
CW
】
option editable.
Finally, enter a value by a key on the front panel and press the unit key.
Note: It is a must to press the unit key or Enter to end typing after all numeric values are entered.
3)
Increasing (decreasing) the frequency of CW
The frequency of CW can be output after setting a fixed value or increased (decreased) in a digit
position by using arrow keys (knob). For example, in the CW option, move the cursor by using left
and right arrow keys to select a digit position to be changed, and change the value in the currently
selected position so as to switch frequency at fast step.
Additionally, in the CW option, move the cursor to the far left and wait for the cursor to disappear,
then press up and down arrow keys or the knob to increase or decrease the CW input at the preset
step.