Tel: 886.909 602 109 Email: [email protected]
98
4 Menu
The menu of S1465 series signal generator includes: Frequency, Amplitude, Sweep, Modulation,
Base, I/Q, System, File, Save/Recall, Print. As the number of soft keys on the front panel of the
instrument is limited, the manufacturer sets the common function menu as boot menu by default,
including: Frequency, Amplitude, Sweep, Modulation, Base, I/Q, RF ON/OFF. The menu of the signal
generator is described below.
4.1 Menu Structure and Parameter Settings
4.1.1 Frequency
Press
【
Frequency
】
key on the front panel or click [Frequency] menu item in user interface, and
a frequency-related menu will pop up to enable you to set frequency-related parameters. The main
operation dialogs are as follows:
4.1.1.1 Freq Config
Fig.4.1 Freq Config Dialog
Freq Config Dialog, shown in Fig.4.1, enables you to set parameters such as CW, Freq Step,
Freq Offset, Freq Ref Switch, Freq Mul, and Freq Ref when Freq Ref Switch is ON.
Fig.4.2 LF Out Dialog
LF Out Dialog, shown in Fig.4.2, enables you to set parameters such as LF output ON/OFF, LF,
LF Ampl, LF DC Offset and LF Waveform. LF Waveform mainly includes Sinc, Square, Triangle,
Zigzag (Zigzag-up and Zigzag-down), White noise (White noise and Gauss), SweepSinc, DualSinc.
