Saluki S1465 Series, User Manual, Page: 229 / 243

273
Tel: 886.909 602 109 Email: sales@salukitec.com
www.salukitec.com
229
84
[:SOURce]:FM:INTernal:FREQuency:ALTernate:AMPLitude
:PERC ent(?)
Set the percent of amplitude
occupied by double-sine
frequency
85 [:SOURce]:FM:INTernal:NOISe(?) Set the FM noise type
86 [:SOURce]:FM:INTernal:RAMP(?) Set the FM zigzag direction
87 [:SOURce]:FM:INTernal:SHAPe(?) Set the FM waveform
88 [:SOURce]:FM:INTernal:SWEep:TIME(?)
Set the sweep frequency sine
sweep time
89 [:SOURce]:FM:SOURce(?) Set the FM source
90 [:SOURce]:FM:STATe(?) Set the FM on-off
91 [:SOURce]:PM[:BANDwidth]|BWIDth(?)
Set the phase modulation
bandwidth
92 [:SOURce]:PM:DEViation(?)
Set the phase modulation offset
93
[:SOURce]:PM:INTernal:FREQuency(?)
Set the phase modulation rate
and sweep frequency sine start
frequency or double-sine
frequency 1
94 [:SOURce]:PM:INTernal:FREQuency:ALTernate(?)
Set the sweep frequency sine
stop frequency or double-sine
frequency 2
95
[:SOURce]:PM:INTernal:FREQuency:ALTernate:AMPLitude
:PERC ent(?)
Set the percent of amplitude
occupied by double-sine
frequency 2
96 [:SOURce]:PM:INTernal:NOISe(?)
Set the phase modulation noise
type
97 [:SOURce]:PM:INTernal:RAMP(?)
Set the phase modulation zigzag
direction
98
[:SOURce]:PM:INTernal:SHAPe(?)
Set the phase modulation
waveform
99 [:SOURce]:PM:INTernal:SWEep:TIME(?)
Set the phase modulation sweep
frequency sine sweep time
100 [:SOURce]:PM:SOURce(?)
Set the phase modulation source
101 [:SOURce]:PM:STATe(?)
Set the phase modulation on-off
102 [:SOURce]:DM:IQADjustment::GAIN(?)
Set the internal I/Q gain balance
103
[:SOURce]:DM:IQADjustment:IOFFse(?))
Set the I channel offset value
104 [:SOURce]:DM:IQADjustment:QOFFse(?)
Set the Q channel offset value
105 [:SOURce]:DM:IQADjustment:QSKew(?)
Set the phase angle
between I/Q vectors
106 [:SOURce]:DM:IQADjustment[:STATe](?)
Set the I/Q adjustment on-off
107 [:SOURce]:DM:MODulation:ATTenuation(?)
Set the I/Q signal
attenuation