Tel: 886.909 602 109 Email: [email protected]
44
manually edited. The list is illustrated in Fig.2.14. The list has embedded input and switch controls. Drop-down
box control, button control.
Method 1:
A list cell can be edited by clicking it on the screen, which can be input box control or switch
control. Drop-down box control, button control. The editing methods of these controls are the same as those
described in 1) - 7).
Method 2:
Turn the front panel RPG to select a list.
Pressing the knob will select a line for editing, and turning the knob or pressing arrow keys will
select each line in turn.
Pressing left and right arrow keys will select a cell in turn. A yellow-lined box will appear when a
cell is an editable control which can be edited by following the steps in 1) - 7) by pressing the knob.
Fig.2.14 Table Editing Schematic
9)
Shortcut operations
The main interface supports shortcut operations of modulation ON/OFF and working mode. The
instrument status can be fast switched by screen touch. There is a prompt display of current status
information on the left of each function module, as shown in Fig.2.15.