Tel: 886.909 602 109 Email: [email protected]
55
Fig.2.25 Frequency Configuration Dialog (other settings)
As seen above: In all functions relating to frequency, parameters are in Hz, digital inputs end
with a frequency unit like GHz, MHz, kHz or Hz and the currently shown values and units are
accepted by pressing Enter (terminator key).
Parameters in Frequency Configuration Dialog include: CW, relative frequency mode (ON/OFF),
relative frequency reference, frequency offset, clock multiplier factor, setting of LF signal generator,
phase reference, phase adjustment and other menus.
2.3.3.2 Amplitude
The Ampl Config Dialog is used for setting parameters relating to the power characteristics.
Pressing the
【
Amplitude
】
key on the front panel or clicking the [Frequency] function area on the
screen will display a pop-up Ampl Config Dialog on UI, as shown in Figures 3.26 and 3.27. Confirm
an appropriate unit after completion of digital inputs to end typing. Settings in this dialog include:
Power level, relative power mode (ON/OFF), relative amplitude reference setting, attenuation control,
amplitude offset, amplitude step, ALC loop state ON/OFF, search style (Manu/Auto), amplitude
reference, do search, search output (normal/min), amplitude level control mode, ALC band width
(Man/Auto), external detector couple coefficient, output blank (ON/OFF).
