163
<Functions of Model Menu (Helicopter Functions)>
● S e l e c t t h e f u n c t i o n
name and return to the
p r e c e d i n g s c r e e n b y
touching the
RTN
button
or pushing the
Home/Exit
button.
<SensorTouch™>
GYRO mixing
This function used to adjust gyro sensitivity.
The sensitivity and operation mode (Normal mode/
AVCS mode) can be set for each condition.
The gyro sensitivity can be switched with each
condition or the switch. (5 sensitivities)
*Compatible with 3 axis gyro(CGY750).
Setting method
● When using this function, move the cursor
to the [ACT] item and touch the RTN button
to switch to the data input mode. Turn the
touch sensor to the left and touch the RTN
button. (ON is displayed.)
● When you want to set the same contents at
other conditions, select the group mode.
When you want to set the selected condition
only, select the single mode (initial setting).
● Three rates can be switched for each
condition. (Rate 1/Rate 2/Rate 3)
● A fine tuning VR can be set.
● Select [GYRO] at the model menu and call the
setup screen shown below by touching the RTN
button.
(Currently selected condition name)
(Rate No. display)
●Fine tuning VR settings
●Gyro sensitivity adjustment
●Mode selection:
[AVCS]/[NORM]
●Gyro type selection:
[GY]/[NORM]
Note: When using the [Gyro2]/[Gyro3] function,
assign [Gyro2]/[Gyro3] to any channel on the
function screen.
Always set to [--] both (control) and (trim) for
the [Gyro] function at the Function menu in
the Linkage menu.
● When the GYRO function button is selected, each
GYRO detailed setting screen appears.
Scrolling
● Moving cursor
● Selecting mode
● Adjusting value
● To next page
Summary of Contents for FX-32
Page 1: ...Instruction Manual FX 32 No F8078 ...
Page 9: ...9 Introduction Notes ...
