110
<Functions of Linkage Menu>
● Select the function name
and return to the Linkage
menu by touching the
RTN
button or pushing the
Home/Exit
button.
<SensorTouch™>
DATA RESET
Model memory setting data reset. (by item)
This function is designed to allow you to reset
selected portions or all of the settings saved in
the active model memory. You may individually
choose to reset the following sets of data;
T1~T6:
Reset the digital trim setting.
*All the conditions, or the condition currently being displayed
(the entire group for group setting), can be selected.
*The trim step amount and trim rate are not reset.
Model menu setting:
Resets all the functions in the Model menu
except condition select.
Data resetting method
1. Move the cursor to the item you want to
reset and touch the RTN button.
*A confirmation message appears.
2. Execute reset by touching the RTN button
again. (Operate touch sensor or S1 button to
stop resetting.)
[T1-T6 (ALL CONDITION)]: Resets only the T1-T6
(all conditions)
[T1-T6(GROUP COND.)]: Resets only
the data of T1-T6 (condition in use and all the
conditions set to group mode)
[MODEL MENU SETTING]: Resets all the
functions in the model menu, except the
condition selection functions.
[ALL MODEL SETTING]: Resets all the functions
in the linkage menu and model menu except
the frequency, model select, and model
type functions.
All model setting:
Resets all Linkage and Model menu functions
except for frequency, model select, and model type.
Function Name:
A function name is reset.
Telemetry:
Reset the telemetry setting.
[FUNCTION NAME]: Resets only the function
name functions.
[TELEMETRY]: Resets only the teremetry
functions.
● Select [DATA RESET] at the linkage menu and call
the setup screen shown below by touching the
RTN button.
Scrolling
● Moving cursor
● Push
S1
button to advance to next page.
Summary of Contents for FX-32
Page 1: ...Instruction Manual FX 32 No F8078 ...
Page 9: ...9 Introduction Notes ...
