129
<Model Menu (Airplane/Glider Functions)>
Setting method
● Move the cursor to the ACT/INH item and
touch the RTN button to switch to the data
input mode.
Turn the touch sensor to the left and touch
the RTN button. (ON is displayed.)
● When setting a switch, move the cursor to
the [--] item of the switch and touch the RTN
button to call the selection screen, and then
select the switch and set its ON direction.
(Always ON at "--" setting)
(For a description of the switch selection
method, see the description at the back of
this manual.
● When setting a VR, move the cursor to the
Fine tuning "--" item and touch the RTN button
to call the selection screen, and then select
the VR. The adjustment rate can be set.The
VR operation mode can also be set.
(For a description of the fine tuning VR setting
method, see the description at the back of
this manual.)
● A mixing curve can be set.
(For a description of the curve setting
method, see the description at the back of
this manual.)
[Fine tuning VR operation mode]
[LIN.]
Mixing rate 0% at center of VR.
When the VR is turned clockwise and
counterclockwise, the mixing rate
increases and decreases, respectively.
[ATL+]
Mixing rate 0% at left end of VR.
When the VR is turned, the mixing rate
increases.
[ATL-]
Mixing rate 0% at right end of VR.
When the VR is turned, the mixing rate
increases.
[SYM.]
When the VR is turned to the left or
right of the neutral position, the mixing
rate increases.
Summary of Contents for FX-32
Page 1: ...Instruction Manual FX 32 No F8078 ...
Page 9: ...9 Introduction Notes ...
