86
<Functions of Linkage Menu>
● Select the function name
and return to the Linkage
menu by touching the
RTN
button or pushing the
Home/Exit
button.
<SensorTouch™>
T1-T6 SETTING
Digital trim settings
This function adjusts the digital trim's control
step amount and operation mode (T1~T6.)
When the flight conditions are set, the trim
operation can be coupled with among all the
conditions which combination mode is selected.
Control step amount setting
1. Use the touch sensor to move the cursor to
the [STEP] item and touch the RTN button to
switch to the data input mode.
Set the control step amount by turning the
touch sensor.
Initial value: 4
Adjustment range: 1~200
(When the RTN button is touched for 1 second, the control
step amount is reset to the initial value.)
*When the value is made large, the change per step becomes
larger.
2. Touch the RTN button to end adjustment and
return to the cursol move mode.
Separate/combination mode selection
1. Use the touch sensor to move the cursor
to the [SEPA./COMB.] item and change to
blinking by turning the touch sensor and
select the mode by touching the RTN button.
[COMB]: Combination mode. The trim data
are reflected at all the flight conditions.
[SEPAR]: Separate mode. Trim adjustment for
each flight condition.
Trim display units
● Percentage(%) display can be selected at
trim.
1. Select "TRIM UNIT" and turn the dial and
switch the display to [%] or [--].
*The display blinks.
[%]: Trim is displayed in % units.
[--]: Trim is displayed numerically as in the
past.
2. When the RTN button touched, the setting is
changed.
● Select [T1-T6 SETTING] at the linkage menu and call
the setup screen shown below by touching the
RTN button.
Scrolling
● Moving cursor
● Selecting mode
Summary of Contents for FX-32
Page 1: ...Instruction Manual FX 32 No F8078 ...
Page 9: ...9 Introduction Notes ...
