146
<Model Menu (Airplane/Glider Functions)>
● S e l e c t t h e f u n c t i o n
name and return to the
preceding screen by
touching the
RTN
button
or pushing the
Home/Exit
button.
<SensorTouch™>
MOTOR
[Corresponding model type]: EP glider, general
This function lets you set the operation speed
when the motor of a F5B or other EP glider is
started by switch. The operation speed can be set
in 2 ranges of slow speed flight and high speed
flight (Speed 1/Speed 2). This function can also be
operated as a safety function by setting 2 switches.
● The in side and out side operating speeds can be
adjusted independently in 2 ranges (Speed 1/
Speed 2).
● The boundary between the 2 ranges can be set.
(From speed 1 to speed 2)
● The set operation speed operation can be
activated at initial operation only. (1 time
operation) However, operation can be repeated
● Move the cursor by
set switch or VR.
by setting the switch to OFF before operation is
finished. When you want to reset 1 time operation,
set the ACT/INH item to [INH] and then reset it to
[ON].
● The motor (CH3) is controlled by SW-G. (Initial
setting) When changing the switch or stick which
controls the motor, first change Function of the
Linkage Menu.
Note: When using this function, always check initial
operation with the propeller removed.
● When using this function, move the cursor
to the [ACT/INH] item and touch the RTN
button to switch to the data input mode.
Turn the touch sensor to the left and touch
the RTN button.
● When you want to set the "One time mode",
move the cursor to the [ONE TIME] item and
turn the touch sensor to the left and touch
the RTN button.
● Speed 1 to 2
The speed 1 and speed 2 region boundary
can be changed,
● Operation speed adjustment
The speed when speed 1 and speed 2 are
ON (In) and OFF (Out) can be adjusted.
● When using this function, move the cursor
to the [ACT/INH] item and touch the RTN
button to switch to the data input mode.
Turn the touch sensor to the left and touch
the RTN button.
● Group/single mode switching
(For more information, see the description
at the back of this manual.)
● Switch
A switch that turns the function itself
ON/OFF can be selected.
● Motor off position
Press the EDIT button for 1 second when
[SW-G] is in the motor OFF position you want
to set. The direction of the motor switch is
memorized. The screen graph display OFF
direction also changes.
Notes
● First decide the motor OFF direction, and then
set the speed. When you want to reset the
motor OFF direction, also reset the speed.
● We recommend that motor OFF be set in
combination with F/S.
● Set the basic operation direction with the reverse
function to match the ESC used.
● Always set the motor OFF position.
(Currently selected condition name)
● Select [MOTOR] at the model menu
and call the setup screen shown
below by touching the RTN button.
Scrolling
● Moving cursor
● Selecting mode
● Adjusting value
● To next page
Summary of Contents for FX-32
Page 1: ...Instruction Manual FX 32 No F8078 ...
Page 9: ...9 Introduction Notes ...
