Ricoh MP 401 spf, User Manual, Page: 178 / 224

Message Causes Solutions
"Put original back, check it
and press the Start key." Original jammed during
Memory Transmission. Press [Exit], and then send the
documents again.
"Some invalid destination(s)
contained. Do you want to
select only valid
destination(s)?" The specified group contains
fax destinations, e-mail
destinations, and/or folder
destinations, either of which
are incompatible with the
specified transmission
method. In the message that appears at each
transmission, press [Select].
"Some page(s) are almost
blank. To cancel press the
Stop key." The first page of the
document is almost blank. The original's blank side might have
been scanned. Be sure to place your
originals correctly. For details about
determining the cause of blank pages,
see "Detecting Blank Pages", Fax .
"The selected file(s)
contained file(s) without
access privileges. Only
file(s) with access privileges
will be deleted." You tried to delete a
document for which you do
not have permission to
delete. To check your access permission for
stored documents, or to delete a
document you do not have permission
to delete, see Security Guide .
"Updating the destination
list... Please wait. Specified
destination(s) or sender's
name has been cleared." The destination list is being
updated from the network
using Web Image Monitor. Wait until the message disappears. Do
not turn off the main power switch
while this message is displayed.
Depending on the number of
destinations to be updated, there may
be some delay before you can resume
operation. Operation is not possible
while this message is displayed.
"You do not have the
privileges to use this
function." The logged in user name
does not have permission for
the selected function. For details about how to set
permissions, see Security Guide .
"The destination cannot be
selected because its
encryption certificate is not
currently valid." The user certificate
(destination certificate) has
expired. A new user certificate must be installed.
For details about the user certificate
(destination certificate), see Security
Guide .
10. Troubleshooting
176