Ricoh FT4460, Service Manual, Page: 330 / 413

10. Attach the rear jogger fence [A] to the jogger wire by placing the bead in
the hole under the rear stop plate [B], and tighten the stop plate screw.
11. Position the rear logger fence to 11 ± 0.3 mm (home position) from the
rear side plate [C].
12. Position the front jogger fence [D] 10 mm from the front side plate [E],
and tighten the side plate screw.
NOTE: Make sure the front and rear jogger fences are 319 ± 1 mm apart.
5-114