Ricoh FT4460, Service Manual, Page: 182 / 413

28 February 1989
Mode No.
Function Data Factory
Comments
Setting
72 Multi
Enables Multi 0: No
0 Must be set to 1 to
Duplex/Over- Duplex/Overlay 1: Multi
multi-duplex/over-
Iay Operation
Operation. Duplex/
lay unit is installed.
Overlay
73 Total Color Shows the total
Press # key to dis-
Copy Count number of color
play the first three
copies (Red +
digits in the Mag-
Green + Blue) in
nification indicator.
the Magnification
Press “.” key to dis-
Ratio Indicator.
play the second
three digits.
74 Color Toner
ID sensor check is
0: 5 copies 0
Supply Detec- performed every 5 1: 10 copies
tion copies or 10 copies.
75 ID Sensor Selects the bias volt- Blue/Green:
0 0: Normal
Bias (Color age applied to the (Normal Control)
1: Lighter
Toner) bias roller when
0: -320V 2: Darker
sensing image den- 1: -280V 3: Darkest
sity. 2: -340V
3: -360V
(Initial Control of
SP Mode #10)
0: -320V
1: -320V
2: -320V
3: -320V
Red:
(Normal Control)
0: -240V
1: -200V
2: -260V
3: -280V
(Initial Control of
SP Mode #10)
0: -280V
1: -280V
2: -280V
3: -280V
76 Sorter Bin
Sets the stack quan- 0: No limit
0 Sort Mode: Limit
Capacity tity limit. 1: Limit
= 20 sheets/bin
Stack Mode: Limit
= 30 sheets/bin
(A4/LT)
= 10 sheets/bin
(A3/DLT)
4-22