Ricoh FT4460, Service Manual, Page: 131 / 413

28 February 1989
The jogger mechanism aligns the paper in the duplex/overlay copy mode.
The jogger motor [A] drives the jogger fences [B] to within 10 mm of the
sides of the paper when the paper enters the jogger section.
When paper is in the jogger section, it is stopped and the jogger fences are
then driven against both sides of the paper.
As the paper is being jogged, the guide plates [C] will be lifted by the jogger
solenoid [D], preventing the rollers from interfering with the jogging process.
NOTE:
The I/O
The jogging process performed when the size of paper is A4 (LT)
lengthwise or less. No jogging is done with longer papers because
the trail edge will be held in the inverter unit.
control PCB will monitor the condition of the jogger home position
sensor. If the I/O control PCB cannot establish the home position of the jog-
ger, service code 81 or 82 will be indicated.
2-78